I have been working on these beams off an on for a few days I still have to cut and turn them. I am going to have new axles made
4" wider beams
-
- Posts: 56
- Joined: Sat Jun 26, 2010 12:02 pm
- Bronco Info: 95 bronco 5.8 coilovers, deavers, 2.5 fox, full glass, air bumps, 9" rearend
- KBL
- Posts: 37
- Joined: Mon Jun 28, 2010 6:40 pm
- Bronco Info: Working on a '73 F-100 with a TTB conversion
- Contact:
Re: 4" wider beams
Nice! Are you going to stick with the stock pivot bushings or go with uniballs?
www.off-roadweb.com
-
- Posts: 56
- Joined: Sat Jun 26, 2010 12:02 pm
- Bronco Info: 95 bronco 5.8 coilovers, deavers, 2.5 fox, full glass, air bumps, 9" rearend
Re: 4" wider beams
Stock bushings for now.
-
- Posts: 56
- Joined: Sat Jun 26, 2010 12:02 pm
- Bronco Info: 95 bronco 5.8 coilovers, deavers, 2.5 fox, full glass, air bumps, 9" rearend
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: 4" wider beams
Have you tested axle alignment with the extensions?
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
-
- Posts: 56
- Joined: Sat Jun 26, 2010 12:02 pm
- Bronco Info: 95 bronco 5.8 coilovers, deavers, 2.5 fox, full glass, air bumps, 9" rearend
Re: 4" wider beams
No but I know I am going to have to clock the third member. My axles are getting splined right now so as soon as I get them I will do it
Here is a picture of my jig for the cut and turn
Here is a picture of my jig for the cut and turn