GoFastBroncos.com

Posted: **Thu Jul 27, 2017 8:36 pm**

What size steel plate is being used for this? 16 gauge? 18 gauge?

Sent from my iPhone using Tapatalk

Posted: **Fri Jul 28, 2017 8:57 am**

Assuming you are talking plates from the tubes to the body at the A-pillar and B pillar, etc. I have seen and used anything from 10 or 11 ga to 16. 16 seemed on the thin side to me, but yes, I realize the body is thinner than that. I guess thickness depended on the area of application.

If you are meaning where the tubes go through the floor and you are welding plates in there I have always used .125" for that.

Posted: **Sun Jul 30, 2017 10:43 pm**

At the shop we use 14g. I also have all the patterns

Posted: **Mon Jul 31, 2017 6:00 am**

Do you mind sharing the plating patterns ?

GoFastBroncos.com

Plating Cab to Cage

Plating Cab to Cage

Re: Plating Cab to Cage

Plating Cab to Cage

Re: Plating Cab to Cage