Stock width with 3" glass fenders

westco
Posts: 75
Joined: Sat Dec 12, 2009 6:00 pm
Location: Pauma Valley,Ca

Stock width with 3" glass fenders

Post by westco »

I have a 95 F150 4x4, Solo C&T, arms and Bilsteins. Truck is overall clean with 125k miles but the front fenders have a little rust at the lower section that I would like to fix.
I do not want to extend my beams but thinking of going with McNeil 3" wide glass fenders, my question is would it look ok with 35s or would it be to narrow?

Any pics?..I have been doing Google searches but haven't found anything. Thanks
carlover
Posts: 74
Joined: Wed Mar 23, 2016 4:33 pm
Bronco Info: 95 lt 351w in progress

Re: Stock width with 3" glass fenders

Post by carlover »

Autofab makes some 1" flare with a bigger rise to clear 35's that look great stock width.
carlover
Posts: 74
Joined: Wed Mar 23, 2016 4:33 pm
Bronco Info: 95 lt 351w in progress

Re: Stock width with 3" glass fenders

Post by carlover »

pics
Attachments
18341904_1696752627020274_1244822437294827463_n.jpg
18341904_1696752627020274_1244822437294827463_n.jpg (85.23 KiB) Viewed 591 times
18301514_1696752673686936_1974084971394158128_n.jpg
18301514_1696752673686936_1974084971394158128_n.jpg (102.28 KiB) Viewed 591 times
westco
Posts: 75
Joined: Sat Dec 12, 2009 6:00 pm
Location: Pauma Valley,Ca

Re: Stock width with 3" glass fenders

Post by westco »

Thanks carlover, I have access to some 3" wide fenders for $100.00 from a neighbor
carlover
Posts: 74
Joined: Wed Mar 23, 2016 4:33 pm
Bronco Info: 95 lt 351w in progress

Re: Stock width with 3" glass fenders

Post by carlover »

I had 3 or 4" flare with this setup, let me dig up some pics. it didn't look all that great honestly.
Post Reply