Pro Comp 4" spring
-
- Posts: 119
- Joined: Tue Jun 05, 2012 7:27 pm
- Bronco Info: 99 Explorer -Dixon Front, Giant 64 rear.
Pro Comp 4" spring
For those of you running this spring, how much did they settle? I installed a new set on mine and they are really tall, I'm hoping they will settle down some. Anyone have experience with this?
- Agui-E7TE
- Posts: 1483
- Joined: Sat Jul 30, 2011 2:50 am
- Bronco Info: 89 Bronco w/ 6 in. skyjacker kit w/ dual Bilstein 5150 shocks up front and Deaver F53's in the rear
Re: Pro Comp 4" spring
I installed them on my Bronco and the front was pretty darn level with the rear which has a set of Deaver F53s as well as a 3.5-inch angled lift block. I took it out to Glamis for New Years and once I got back home I immediately noticed that the front was at least an inch and a half lower. They will settle quite a bit after beating on them in the dirt but that is to be expected since they sit taller than the advertised lift when they are new.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: Pro Comp 4" spring
I have had the same set on my bronco for over 100,000 miles ,and a ton of hard use,they have settled about 2"
- hobbyturnedobsession
- Posts: 4565
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Re: Pro Comp 4" spring
Well over an inch
-
- Posts: 119
- Joined: Tue Jun 05, 2012 7:27 pm
- Bronco Info: 99 Explorer -Dixon Front, Giant 64 rear.
Re: Pro Comp 4" spring
Good to hear, thanks. I went from a 6" to the 4" when I rebuilt my front end and it is sitting nearly the same as it did with the 6".
- Polarcub
- Posts: 1949
- Joined: Thu Dec 10, 2009 8:53 pm
- Bronco Info: 95 Eddie Bauer and 95 XLT still in the shop........
- Location: Brighton, TN
Re: Pro Comp 4" spring
1"-1.5" mine lasted about a year and half before they collapsed on the the top 3 coils.