For those about to stretch...Ideal wheelbase?

User avatar
Travisfab
Posts: 1274
Joined: Thu Jun 10, 2010 6:09 pm
Bronco Info: 95 XLT 5.8 C6 Prerunner

Re: For those about to stretch...Ideal wheelbase?

Post by Travisfab »

You mean Pedomobile?

Image
dtbback
Posts: 1677
Joined: Mon Mar 03, 2014 8:45 am
Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig

Re: For those about to stretch...Ideal wheelbase?

Post by dtbback »

PaulW wrote:
shockseals.com wrote:
PaulW wrote:No fiberglass for mine because of the modestly wider axle.
What width wms to wms did you end up with?
======
Stock Alcoas 15x7.5 with 35s
My axle wheel mount to wheel mount is the same as a van. I cannot remember the number, but I reported it previously. Maybe on the 9" thread???
One has to measure carefully with aftermarket wheels because of they don't always use the stock offset. That will screw up pulled fenders and might require glass. Stupid wide rims have the same issue.
Paul
Hey Paul,

Did setting your rear axle width the same as thebvan axles make your rear track width wider than the front?
shockseals.com
Posts: 1116
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas
Contact:

Re: For those about to stretch...Ideal wheelbase?

Post by shockseals.com »

Yes. Rear is wider than front slightly
Kris Hernandez
shockseals.com
User avatar
Travisfab
Posts: 1274
Joined: Thu Jun 10, 2010 6:09 pm
Bronco Info: 95 XLT 5.8 C6 Prerunner

For those about to stretch...Ideal wheelbase?

Post by Travisfab »

Buy mine, it's 120"
User avatar
funinthesun95
Posts: 1701
Joined: Thu May 13, 2010 2:06 pm
Bronco Info: 1992 Bronco MAF UsShift
Location: San Diego
Contact:

Re: For those about to stretch...Ideal wheelbase?

Post by funinthesun95 »

A few guys have done this over the last 6 mo.... looking forward to seeing more
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
Post Reply