Gen 2 Raptor Coilovers on Bronco?

[Colin1545]

Hey guys so I ended up buying a full set of Gen 2 Raptor takeoff shocks/coilovers off ebay for $650. I really only needed the rears for my 1993 Bronco but now it's got me thinking about a use for the front coilovers. What are yalls thoughts on potentially making a custom bucket to mount these in the front to replace the coil springs? Would it work?

[VintageIronFab]

Hey get some angle iron and find out! I’ve thought the same thing but don’t like the idea of a single rate setup

[arse_sidewards]

Cut the coil bucket and install an F250 shock mount.

https://therangerstation.com/tech_libra ... ower.shtml

[ChaseTruck754]

I don't think that F-250 shock mount would fit the coilover...

[BDKW1]

Shock doesn't have enough travel and the spring rate is too high for beams.

[Colin1545]

I found a guy who had them on the front of his brick nose. He said the ride was improved. I'm thinking of just giving it a try with these Gen 2 coilovers and seeing how it is. I'll definitely install some limit straps and look into some softer spring rates coils