Upgraded the trans pan on my F350 with a 5R110 trans, the pan is the same size and layout as the E4OD and 4R100 transmissions. The big thing here is not really the pan and the extra capacity but a better transmission filter that can be used. I chose to go with the Derale trans pan with the cooling tubes. Not sure if it really make a difference but on my tow rig anything will help. Plan on making the same install into my Bronco, that is why I am posting it here.
One can use the factory 5R110 pan from a 08-10 Ford F350 superduty 4x and get the pan for about $40
The derail unit is a bit more but well made and made of steel rather than cast aluminum, figuring it can take a bump without cracking like a cast one would.
https://www.amazon.com/Derale-14208-Tra ... B004XONSX0
The upgraded trans filter is a much higher quality than the flat paper filters of the past. Part number below in the link.
https://www.amazon.com/Motorcraft-FT-18 ... Src=detail
Easy install, pans have drain bolts so a plus for some older trucks, why it took forever to put drain plugs on a transmission I will never know.
Upgraded E4OD pan and filter
- Needles929
- Posts: 170
- Joined: Thu Sep 14, 2017 10:11 am
- Bronco Info: 95 Part Deux
- Location: Mesa AZ
Re: Upgraded E4OD pan and filter
Added to the list! I really like that pan! Thank you
95 Part Deux. Starting from scratch.
Re: Upgraded E4OD pan and filter
Damon, It looks like the pan is deeper and uses the extended filter?
Seems like your clearance would be less.
One of the issue I had was trans pan damage even with my skid.
Seems like your clearance would be less.
One of the issue I had was trans pan damage even with my skid.