80-86 factory tach wiring.

Broncow · Post by **Broncow** » Sun Jan 22, 2017 4:09 pm

Found a factory tach to put into the kids truck (didn't come with one) and need to know what goes where from the four posts on the rear. Any insight is greatly appreciated.

Alan.

philofab · Post by **philofab** » Mon Jan 23, 2017 8:08 am

Do you have just the tach? Or the whole cluster? If you have the whole cluster just plug it in. If just the gauge it's going to take a bit of work and finding a whole cluster will be way easier.

Broncow · Post by **Broncow** » Mon Jan 23, 2017 9:52 am

I do have the complete cluster. But it's not salvageable. Has a fried circuit in the ribbon thingy. Plus, there are no wires in my connector.

philofab · Post by **philofab** » Mon Jan 23, 2017 4:42 pm

Odd that your truck is missing the wires. Every 80-86 truck and Bronco I have seen was wired for a tach.

Try looking here for info:

http://www.ford-trucks.com/forums/28147 ... eries.html

Broncow · Post by **Broncow** » Tue Jan 24, 2017 4:02 pm

That should be a useful link. Thanks.

80-86 factory tach wiring.

80-86 factory tach wiring.

Re: 80-86 factory tach wiring.

Re: 80-86 factory tach wiring.

Re: 80-86 factory tach wiring.

Re: 80-86 factory tach wiring.