steering wheels
- agavelouis
- The Champ
- Posts: 78
- Joined: Fri Jul 11, 2014 11:14 am
- Bronco Info: 1994 5.0 Bronco. Solo Motorsports all the way around
- Location: Gilbert, AZ
- Contact:
Re: steering wheels
Found this in the shop today
This one is for a 92 Bronco customer of mine (4513). Momo has them in stock, and I can get you them if you would like.
This one is for a 92 Bronco customer of mine (4513). Momo has them in stock, and I can get you them if you would like.
- Attachments
-
- IMG_6161.JPG (217.17 KiB) Viewed 603 times
- agavelouis
- The Champ
- Posts: 78
- Joined: Fri Jul 11, 2014 11:14 am
- Bronco Info: 1994 5.0 Bronco. Solo Motorsports all the way around
- Location: Gilbert, AZ
- Contact:
Re: steering wheels
I have an extra 4513 (92 and older big bronco) here at the shop if anyone is interested.
Momo also has the 93 and up Bronco / 92 and up F150 in stock (4535) if you are looking to get one.
Momo also has the 93 and up Bronco / 92 and up F150 in stock (4535) if you are looking to get one.
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: steering wheels
Probably a lame ass question-- anyone care about using cruise control with the Sparco wheels? CC isn't something that I use a ton but its one of those stupid long drive veg-out conveniences that are kind of nice. Just curious if anyone had adapted something into the dash or a console that was somewhat stock appearing??
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: steering wheels
I'm interested in seeing if someone has done this as well.VintageIronFab wrote:Probably a lame ass question-- anyone care about using cruise control with the Sparco wheels? CC isn't something that I use a ton but its one of those stupid long drive veg-out conveniences that are kind of nice. Just curious if anyone had adapted something into the dash or a console that was somewhat stock appearing??
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: steering wheels
you need the Saleen bracket.
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: steering wheels
Where can those be found?
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: steering wheels
The command a pretty penny IF you can find one on eBay. Willie has one. We had discussed me putting it in cad to laser cut copies, but never got anywhere on it.
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: steering wheels
http://www.race-dezert.com/forum/thread ... eel.32801/
The machinist email who made them is in this thread I found.
The machinist email who made them is in this thread I found.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: steering wheels
wow - $125. Willie - hit me up & lets get to making some of these. I bet we can beat that price!
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: steering wheels
Agree
I'm just not sure how fast they would fly off the shelf.....
I'm just not sure how fast they would fly off the shelf.....
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: steering wheels
If guys are buyin up at $125 I'd say we may sell a few. If that thing is just killing time chillin out on your shelf send it up on my way for a couple days and I'll make the file. I'll get it back to you before you even know it's gone. At that point it's just seeing what it would cost to have them cut, which is a farm it out job.
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: steering wheels
Jkrell has a small torchmate
that could burn these easy. So does Kelly I think.
that could burn these easy. So does Kelly I think.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: steering wheels
This is going off topic, but my concern with the torchmate & plasma type cutters is cleanliness & kerf. My thought it laser or water jet would be a much better choice for something as small as this.
For cutting out basic tabs, etc. the tochmate is fine, but there is a reason I'm having some of my stuff laser cut when a buddy a few doors down from my old shop has a torchmate & will cut for me.
For cutting out basic tabs, etc. the tochmate is fine, but there is a reason I'm having some of my stuff laser cut when a buddy a few doors down from my old shop has a torchmate & will cut for me.
-
- Posts: 232
- Joined: Sat Apr 27, 2013 10:09 am
- Bronco Info: Ford F150 Flareside
- Location: So Cal
steering wheels
For intricate parts I would agree laser or water jet the way to go.
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: steering wheels
Here is more what I had in mind. The Kenworth I was in today had this type of cruise switches or the next are older BMW switches that are similar.
The beauty of the saleen bracket is its stupid simple to install. In the address the guy is talking about the additional parts for the back of the switches... Does anyone know what that is?
The beauty of the saleen bracket is its stupid simple to install. In the address the guy is talking about the additional parts for the back of the switches... Does anyone know what that is?
- Attachments
-
- image.jpg (116.59 KiB) Viewed 475 times