10"_ wide wheels?
-
- Posts: 652
- Joined: Fri Jan 22, 2010 12:29 am
- Bronco Info: 1990 Bronco EB
- Location: Highland, CA.
10"_ wide wheels?
So I scored some 33x12.50x15 tires and they came on
Some ultra 10" wide wheels, the offset is a little off I think.
For $150 bucks I couldn't pass them up. They were on a 4wd dodge 1500.
Am I going to hurt wheel bearings? Or anything else?
I have photos on Facebook but can't figure out how to transfer to GFB.
Some ultra 10" wide wheels, the offset is a little off I think.
For $150 bucks I couldn't pass them up. They were on a 4wd dodge 1500.
Am I going to hurt wheel bearings? Or anything else?
I have photos on Facebook but can't figure out how to transfer to GFB.
There is no substititute for Horsepower.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: 10"_ wide wheels?
I have 10" wheels on mine,and havent had a problem.just take care and stay on top of maintaining it
-
- Posts: 652
- Joined: Fri Jan 22, 2010 12:29 am
- Bronco Info: 1990 Bronco EB
- Location: Highland, CA.
Re: 10"_ wide wheels?
I really wanted 33x10.50s but they are hard to find used.
I'm saving for a set. I'm going to mount them on my 5 spoke alcoas
I'm saving for a set. I'm going to mount them on my 5 spoke alcoas
There is no substititute for Horsepower.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 10"_ wide wheels?
Wait - you have a set of 5 spoke alcoas??????
Owner of only dead and forgotten projects
- tcm glx
- Peanut Butter
- Posts: 7304
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: 10"_ wide wheels?
ChaseTruck754 wrote:Wait - you have a set of 5 spoke alcoas??????
I thought he had 5 spoke American Racings... not alcoas.
-
- Posts: 652
- Joined: Fri Jan 22, 2010 12:29 am
- Bronco Info: 1990 Bronco EB
- Location: Highland, CA.
Re: 10"_ wide wheels?
Got ya..... I knew that would raise some eyebrows....
They're ARs
They're ARs
There is no substititute for Horsepower.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 10"_ wide wheels?
yeah - there's only room for one member with those on here as I have to keep everybody else begging me for them and keep the bidding up - hahahahaha
Owner of only dead and forgotten projects
Re: 10"_ wide wheels?
I've searched forever for the elusive 5 spoke alcoas. This is all I could find.
If anyone has two others or a set this would be a smoking deal to pick up.
http://cgi.ebay.com/ebaymotors/NIB-Alco ... ccessories
If anyone has two others or a set this would be a smoking deal to pick up.
http://cgi.ebay.com/ebaymotors/NIB-Alco ... ccessories
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 10"_ wide wheels?
I've got 5 - 15"ers and 1 - 16"er. Tempted to grab those but have seen them on eBay forever now and never done anything about it.
Owner of only dead and forgotten projects
-
- Posts: 652
- Joined: Fri Jan 22, 2010 12:29 am
- Bronco Info: 1990 Bronco EB
- Location: Highland, CA.
Re: 10"_ wide wheels?
I know a guy up north that has 6 of them.... His son is keeping them and having omf install bead locks....
There is no substititute for Horsepower.
- Polarcub
- Posts: 1949
- Joined: Thu Dec 10, 2009 8:53 pm
- Bronco Info: 95 Eddie Bauer and 95 XLT still in the shop........
- Location: Brighton, TN
Re: 10"_ wide wheels?
I ran 10" wide wheels for awhile and I ended up going back to a 8" . I had some issues with alignment and ball joints but I think the bigger problem was the tire I was running. I agree with Philo stay on top of maint and you should be okay especially if your not running a bias ply tire.
Jeremy
-
- Posts: 652
- Joined: Fri Jan 22, 2010 12:29 am
- Bronco Info: 1990 Bronco EB
- Location: Highland, CA.
Re: 10"_ wide wheels?
I'm going to run them till I get one more AR23 and a spare33".
There is no substititute for Horsepower.