Door Panels
- hobbyturnedobsession
- Posts: 4565
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Door Panels
Will an 87-91 door panel fit a 92-96 bronco?
I'm just here for the views. It helps me feel wanted.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: Door Panels
the deferost vents wont line up at the wing window
- hobbyturnedobsession
- Posts: 4565
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Re: Door Panels
Is it alterable by any chance?
I'm just here for the views. It helps me feel wanted.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: Door Panels
dont know. havent looked at a later model interior for while. they will go on,but you'll have a gap between the panel and the dash
- hobbyturnedobsession
- Posts: 4565
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Re: Door Panels
That doesn't bother me so much. They dont sell replacements....
I'm just here for the views. It helps me feel wanted.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: Door Panels
what color are you looking for?
i have some grey ish ones.... i think they are grey,or blue not sure haha
i have some grey ish ones.... i think they are grey,or blue not sure haha
- hobbyturnedobsession
- Posts: 4565
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Re: Door Panels
Hahah, black ones sadly..... Gray would work though. They in good condition?
I'm just here for the views. It helps me feel wanted.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: Door Panels
not too bad of shape, i'll go out tomorrow and snap a pic or 2 for ya.
- hobbyturnedobsession
- Posts: 4565
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
-
- Posts: 148
- Joined: Sun Oct 24, 2010 8:45 pm
- Bronco Info: Wishing I had one!
- Location: Coos Bay, OR
- Contact:
Re: Door Panels
To swap in 92-96 panels I found these:
"The 92 and up F150 Has Different vent window ( squared off ) And door panel
turns up to cover difference. You would have to swap vent windows, possibly
arm rest mounts and switches (don't know if plug into your harness or not ). Also run extra wires for door lights but thats easy. I've done it, but truck didn't have PW."
"Vent windows have to be swapped, too. The new panel overhangs the front corners, so you have to get '92-96 vents. Since your truck uses the short weatherbelts and short glass, you don't have to remove the plastic spacer behind the glass run or swap weatherbelts, but I did.
You'll probably also have to move the armrest bracket to match the new panels, but I can't tell exactly where. I took a few guesses and eventually got it right."
"The 92 and up F150 Has Different vent window ( squared off ) And door panel
turns up to cover difference. You would have to swap vent windows, possibly
arm rest mounts and switches (don't know if plug into your harness or not ). Also run extra wires for door lights but thats easy. I've done it, but truck didn't have PW."
"Vent windows have to be swapped, too. The new panel overhangs the front corners, so you have to get '92-96 vents. Since your truck uses the short weatherbelts and short glass, you don't have to remove the plastic spacer behind the glass run or swap weatherbelts, but I did.
You'll probably also have to move the armrest bracket to match the new panels, but I can't tell exactly where. I took a few guesses and eventually got it right."