Optima in stock location?? Mount?

User avatar
Silverslk
Posts: 1932
Joined: Tue Dec 08, 2009 12:13 pm
Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
Location: Garden Grove, CA
Contact:

Optima in stock location?? Mount?

Post by Silverslk »

Ok, I searched and didn't find anything. Last minute before Baja (leaving wednesday morning) I need to get an optima battery I picked up in. The Old (motorcraft) one was leaking and corroding my cables. Anyway, What can I do on the CHEAP AND QUICK to get that Optima secure in the stock location? I eventually want to relocate under with Kiefers setup but for now......HELP!!

THANKS!!!
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
User avatar
Brad12
Posts: 143
Joined: Fri Feb 19, 2010 12:03 am
Bronco Info: STOLEN 1994 XLT, 6 in. Superlift, ext. RAs, 35X12.5 R15, TTB, 8.8, 351, 3.55, K&N
Location: Berkeley, CA
Contact:

Re: Optima in stock location?? Mount?

Post by Brad12 »

I recently decided to get a (VERY) cheap and quick battery hold down to keep my optima in the stock location and ended up with this...

http://www.autozone.com/autozone/access ... =95989_0_0_

I don't know that it would hold up to Baja abuse very well though...
Bronco was stolen in Berkeley, CA in 2014

I'm very slowly making my bronco go fast!
USA
User avatar
hobbyturnedobsession
Posts: 4565
Joined: Tue Apr 27, 2010 8:34 am
Bronco Info: 96 c/o w/ 5.0
Location: High Desert CA

Re: Optima in stock location?? Mount?

Post by hobbyturnedobsession »

Take a look at Brians (yikes) build on page 2. I bought that battery tray and I have a red optima. It works great! It uses the stock tray with an alternate hold clamp.
I'm just here for the views. It helps me feel wanted.
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: Optima in stock location?? Mount?

Post by philofab »

Mine is installed using the factory hold down and optima Group 65 adapters (the ones that snap to both sides). I've never had a problem but then again I never take my Bronco offroad.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
User avatar
Silverslk
Posts: 1932
Joined: Tue Dec 08, 2009 12:13 pm
Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
Location: Garden Grove, CA
Contact:

Re: Optima in stock location?? Mount?

Post by Silverslk »

Philo, where could I get one of those adapters tomorrow?
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: Optima in stock location?? Mount?

Post by philofab »

Silverslk wrote:Philo, where could I get one of those adapters tomorrow?
It should have come with your battery. If not just go to Autozone and ask for one from a new battery. I have a bag of them but that doesn't help you.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
User avatar
Silverslk
Posts: 1932
Joined: Tue Dec 08, 2009 12:13 pm
Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
Location: Garden Grove, CA
Contact:

Re: Optima in stock location?? Mount?

Post by Silverslk »

Brad12 wrote:I recently decided to get a (VERY) cheap and quick battery hold down to keep my optima in the stock location and ended up with this...

http://www.autozone.com/autozone/access ... =95989_0_0_

I don't know that it would hold up to Baja abuse very well though...
Well due to the late notice, I'll probably go pick that up tomorrow.

Hey Philo, how much to throw one of those adapters in the mail for me? :D
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: Optima in stock location?? Mount?

Post by philofab »

Silverslk wrote:
Brad12 wrote:I recently decided to get a (VERY) cheap and quick battery hold down to keep my optima in the stock location and ended up with this...

http://www.autozone.com/autozone/access ... =95989_0_0_

I don't know that it would hold up to Baja abuse very well though...
Well due to the late notice, I'll probably go pick that up tomorrow.

Hey Philo, how much to throw one of those adapters in the mail for me? :D
I can mail them tomorrow if you would like.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
User avatar
Silverslk
Posts: 1932
Joined: Tue Dec 08, 2009 12:13 pm
Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
Location: Garden Grove, CA
Contact:

Re: Optima in stock location?? Mount?

Post by Silverslk »

I'll grab the cheap stuff at vatozone to get me by but would like something better. I'll PM you my address. Shoot me your paypal and I'll throw some your way......how much?
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
User avatar
Polarcub
Posts: 1949
Joined: Thu Dec 10, 2009 8:53 pm
Bronco Info: 95 Eddie Bauer and 95 XLT still in the shop........
Location: Brighton, TN

Re: Optima in stock location?? Mount?

Post by Polarcub »

I also used an adapted bar from another tray for my yellow top works fine. Previous to that I have also used the short rubber straps not bungees but the black ones with little stretch they will work in a pinch. Have a safe trip down!
Jeremy
User avatar
convoy
Posts: 355
Joined: Tue Dec 08, 2009 1:08 pm
Location: San Clemente

Re: Optima in stock location?? Mount?

Post by convoy »

Also IMO I would also carry an extra small size Tie-Down just in case that bracket lets go.
User avatar
Andy Jones
Posts: 2205
Joined: Tue Dec 08, 2009 2:47 pm
Bronco Info: In the Works!
Location: Canyon Lake,ca
Contact:

Re: Optima in stock location?? Mount?

Post by Andy Jones »

small ratchet strap!
dont PM me.. I don't get them on Taptalk
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: Optima in stock location?? Mount?

Post by philofab »

Gorilla Glue!

J/K

Your group 65 adapters are in the mail. Look to see them on Thursday.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
User avatar
Polarcub
Posts: 1949
Joined: Thu Dec 10, 2009 8:53 pm
Bronco Info: 95 Eddie Bauer and 95 XLT still in the shop........
Location: Brighton, TN

Re: Optima in stock location?? Mount?

Post by Polarcub »

philofab wrote:Gorilla Glue!

J/K

Your group 65 adapters are in the mail. Look to see them on Thursday.
Hahaha was thinking JB weld in a pinch!
Jeremy
User avatar
Silverslk
Posts: 1932
Joined: Tue Dec 08, 2009 12:13 pm
Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
Location: Garden Grove, CA
Contact:

Re: Optima in stock location?? Mount?

Post by Silverslk »

philofab wrote:Gorilla Glue!

J/K

Your group 65 adapters are in the mail. Look to see them on Thursday.
You're the MAN!!!
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
User avatar
Silverslk
Posts: 1932
Joined: Tue Dec 08, 2009 12:13 pm
Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
Location: Garden Grove, CA
Contact:

Re: Optima in stock location?? Mount?

Post by Silverslk »

Got home from the mil and in the mailbox waiting for me was the adapters from Philo.

THANKS AGAIN!!!!
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
shockseals.com
Posts: 1116
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas
Contact:

Re: Optima in stock location?? Mount?

Post by shockseals.com »

optima adapters working fine here...
Kris Hernandez
shockseals.com
Post Reply