Windo glass interchange?

Dust
Posts: 781
Joined: Fri Mar 12, 2010 1:41 pm
Bronco Info: Go Slow Ford's From 1957 to 1994
Location: Central Oregon

Windo glass interchange?

Post by Dust »

93 glass fit in a 87 door?
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: Windo glass interchange?

Post by philofab »

Dust wrote:93 glass fit in a 87 door?
It should. The only changes to the doors were different door panels and interior handles. 96 and 97 got a small bead roll on the outside bottom of the door that no one notices.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
User avatar
Andy Jones
Posts: 2205
Joined: Tue Dec 08, 2009 2:47 pm
Bronco Info: In the Works!
Location: Canyon Lake,ca
Contact:

Re: Windo glass interchange?

Post by Andy Jones »

philofab wrote:
Dust wrote:93 glass fit in a 87 door?
It should. The only changes to the doors were different door panels and interior handles. 96 and 97 got a small bead roll on the outside bottom of the door that no one notices.
95 has it to!!
dont PM me.. I don't get them on Taptalk
11wnb
Posts: 6
Joined: Wed Dec 09, 2009 11:01 pm
Bronco Info: 93 EB 5.8 daily driver
Location: Chula Vista

Re: Windo glass interchange?

Post by 11wnb »

I installed the driver side window out of an '85 in my '93 no problem.
Should work for you.
Dust
Posts: 781
Joined: Fri Mar 12, 2010 1:41 pm
Bronco Info: Go Slow Ford's From 1957 to 1994
Location: Central Oregon

Re: Windo glass interchange?

Post by Dust »

Cool deal!
So, I could wait and find out.... What about the power window motors and such?
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: Windo glass interchange?

Post by philofab »

Dust wrote:Cool deal!
So, I could wait and find out.... What about the power window motors and such?
Power window motors have been made by many different manufactures over the years but they are all interchangeable with each other. Regulators and such are all the same. Motors rarely go bad, the gears inside usually strip or the later "clutch" device wears out.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
Post Reply