Page 1 of 1
Bassani headers
Posted: Sun Nov 15, 2020 10:31 am
by crisis88
Does anyone have detailed pics of their Bassani headers installed? I specifically need to see the passenger side header. I need to see how much the header goes over the frame rail.. My passenger side shock hoop is in top of the frame rail vs the side of the frame rail. I just want to be prepared if I have to cut the shock hoop and re-do it before I start installing the headers.
Thanks
Jose
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Sun Nov 15, 2020 10:36 am
by crisis88
Here is a picture for reference. Doesn’t look like it from the picture but there is over an inch between the tube and manifold.
If anyone has a similar pic of their bassani headers installed it would be appreciated.
Thanks
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Sun Nov 15, 2020 4:56 pm
by Andy Jones
You’ll definitely need to cut that tube out.
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Sun Nov 15, 2020 6:39 pm
by crisis88
Awesome. Thanks Andy!! That’s exactly the info I needed.
Jose
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Sun Nov 15, 2020 6:47 pm
by Andy Jones
No problem!
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Fri Nov 20, 2020 8:47 pm
by SteveG
Good call on the spark plug protectors, Andy. Wilson has a couple burned plug wire boots... I have the protectors, just need to install them.
Re: Bassani headers
Posted: Sat Nov 21, 2020 5:26 pm
by Andy Jones
SteveG wrote:Good call on the spark plug protectors, Andy. Wilson has a couple burned plug wire boots... I have the protectors, just need to install them.
Thanks, Steve! Those headers like to fry plug boots.
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Tue Dec 01, 2020 3:19 pm
by crisis88
Got the headers on. Thanks to Andy I was better prepared. New plug wires and the protective sleeves being put on in the next couple days!! Thanks again
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Wed Dec 02, 2020 3:54 pm
by tcm glx
Keep an eye on the header bolts. I for whatever reason always had one that would come loose....until I did the locking ARP bolts.
Go get the Bassani Y Pipe now, the y pipe with those headers work sooooooo well together.
Re: Bassani headers
Posted: Thu Dec 03, 2020 1:07 pm
by Andy Jones
crisis88 wrote:Got the headers on. Thanks to Andy I was better prepared. New plug wires and the protective sleeves being put on in the next couple days!! Thanks again
Sent from my iPhone using Tapatalk
Looks rad!
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Thu Dec 03, 2020 1:10 pm
by crisis88
tcm glx wrote:Keep an eye on the header bolts. I for whatever reason always had one that would come loose....until I did the locking ARP bolts.
Go get the Bassani Y Pipe now, the y pipe with those headers work sooooooo well together.
Y pipe is already installed!! Did the whole shabang... headers, y pipe and their cat. And yes they all work very well together.
Sent from my iPhone using Tapatalk
Re: Bassani headers
Posted: Thu Dec 03, 2020 1:23 pm
by tcm glx
Nice!!! Bet she sounds healthy.
