Bassani headers

crisis88 · Post by **crisis88** » Sun Nov 15, 2020 10:31 am

Does anyone have detailed pics of their Bassani headers installed? I specifically need to see the passenger side header. I need to see how much the header goes over the frame rail.. My passenger side shock hoop is in top of the frame rail vs the side of the frame rail. I just want to be prepared if I have to cut the shock hoop and re-do it before I start installing the headers.

Thanks
Jose

Sent from my iPhone using Tapatalk

crisis88 · Post by **crisis88** » Sun Nov 15, 2020 10:36 am

Here is a picture for reference. Doesn’t look like it from the picture but there is over an inch between the tube and manifold.
If anyone has a similar pic of their bassani headers installed it would be appreciated.

Thanks

Sent from my iPhone using Tapatalk

Andy Jones · Post by **Andy Jones** » Sun Nov 15, 2020 4:56 pm

You’ll definitely need to cut that tube out.

Sent from my iPhone using Tapatalk

crisis88 · Post by **crisis88** » Sun Nov 15, 2020 6:39 pm

Awesome. Thanks Andy!! That’s exactly the info I needed.

Jose

Sent from my iPhone using Tapatalk

Andy Jones · Post by **Andy Jones** » Sun Nov 15, 2020 6:47 pm

No problem!

Sent from my iPhone using Tapatalk

Post by **SteveG** » Fri Nov 20, 2020 8:47 pm

Good call on the spark plug protectors, Andy. Wilson has a couple burned plug wire boots... I have the protectors, just need to install them.

Andy Jones · Post by **Andy Jones** » Sat Nov 21, 2020 5:26 pm

SteveG wrote:Good call on the spark plug protectors, Andy. Wilson has a couple burned plug wire boots... I have the protectors, just need to install them.

Thanks, Steve! Those headers like to fry plug boots.

Sent from my iPhone using Tapatalk

crisis88 · Post by **crisis88** » Tue Dec 01, 2020 3:19 pm

Got the headers on. Thanks to Andy I was better prepared. New plug wires and the protective sleeves being put on in the next couple days!! Thanks again

Sent from my iPhone using Tapatalk

tcm glx · Post by **tcm glx** » Wed Dec 02, 2020 3:54 pm

Keep an eye on the header bolts. I for whatever reason always had one that would come loose....until I did the locking ARP bolts.

Go get the Bassani Y Pipe now, the y pipe with those headers work sooooooo well together.

Andy Jones · Post by **Andy Jones** » Thu Dec 03, 2020 1:07 pm

crisis88 wrote:Got the headers on. Thanks to Andy I was better prepared. New plug wires and the protective sleeves being put on in the next couple days!! Thanks again

Sent from my iPhone using Tapatalk

Looks rad!

Sent from my iPhone using Tapatalk

crisis88 · Post by **crisis88** » Thu Dec 03, 2020 1:10 pm

tcm glx wrote:Keep an eye on the header bolts. I for whatever reason always had one that would come loose....until I did the locking ARP bolts.

Go get the Bassani Y Pipe now, the y pipe with those headers work sooooooo well together.

Y pipe is already installed!! Did the whole shabang... headers, y pipe and their cat. And yes they all work very well together.

Sent from my iPhone using Tapatalk

tcm glx · Post by **tcm glx** » Thu Dec 03, 2020 1:23 pm

Nice!!! Bet she sounds healthy.

Bassani headers

Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers

Re: Bassani headers