If you see this say hi to my dad and his buddy.

This is what I could find. Gas is ~6 lbs/gallon or ~1.6 lbs/liter, so you'll have to do a little math.

ttt

Only used for mock up. Comes with two -10 to -6 fittings. Only has one clamp. $320 + shipping.

Specs here: http://aeromotiveinc.com/products-page/ ... fuel-pump/

A 95 block is a roller block. It will have a roller cam and roller lifters

The only real difference is what Steve touched on with the roller cam blocks.

http://bitboks.com/img/9SOS.jpg http://bitboks.com/img/9SOT.jpg http://bitboks.com/img/9SOV.jpg http://bitboks.com/img/9SOW.jpg http://bitboks.com/img/9SOZ.jpg http://bitboks.com/img/9SP5.jpg http://bitboks.com/img/9SP7.jpg http://bitboks.com/img/9SP8.jpg http://bitboks.com/img/9SPa.jpg http://bitb...

I made one almost exactly like this for mine and had zero issues.

Whiterhino1 wrote:So will the Daytona carrier fit in the factory housing? I run a stock 5.8 so should I be worried about pinion deflection??

Yes, it will fit

Running in 2nd gear all the time will burn up the transmission. Put in lower gears and use drive.

You're welcome

The autofab ad at the top of the page links to gofastbroncos.com instead of autofab.com. Don't know if this was intentional or not.

Pretty good read

http://www.wired.com/2015/06/defense-sh ... ng-mexico/

Sold

Took it out to the fabricator


Cleaning up the floor pan

Just trying to give you some background. It may work alright. I'm not sure. If they're the same part number then you'll be fine, but if they're not be prepared to have issues.

Calibrating the maf for injector size is done in the computer. Any maf that has been "calibrated" for different sized injectors is done with a sampling tube that sends false data to the computer to make it compensate for injector sizing. I'm not sure if the maf from the mustangs is compatible; they ...

Tony Gwynn was one of my favorite players when I was growing up.

The fordfuelinjection.com site was shut down by Ford. They were going to sue him over copyright infringement.