Search found 661 matches
- Fri May 12, 2017 6:53 am
- Forum: Event Planning
- Topic: Overland Expo West
- Replies: 9
- Views: 824
Re: Overland Expo West
Have to love AZ and what they consider "Legal"
- Thu May 11, 2017 9:58 pm
- Forum: Event Planning
- Topic: Overland Expo West
- Replies: 9
- Views: 824
Re: Overland Expo West
Went last year. Decided to pass on it this year, I'll probably go next year. Pretty cool event with lots of great learning booths. P7 does a great job and highly recommend going to their extraction training. The RTT's are cool but way too much money and are heavy in the wrong places. Lots of cool ve...
- Mon May 08, 2017 9:34 pm
- Forum: Go-Fast Tech
- Topic: 8.8 TTB
- Replies: 46
- Views: 4186
Re: 8.8 TTB
I have thought the 9 inch with a currie or dutchman housing welded into the beam would be slick. Gearing a differentials would be limitless. Only thing standing in my way is cubic dollars. Combine that with Roberts new brakes and dana 60 hubs but for a dana 60 spread on the ball joints - bomb proof.
- Wed May 03, 2017 8:35 pm
- Forum: General Tech
- Topic: Super charged 351w 2nd gen lightning
- Replies: 7
- Views: 596
Re: Super charged 351w 2nd gen lightning
He is not running that much boost. Doesn't appear to be inter-cooled (but I could be wrong) so running higher pressure would be problematic, and the came is set up for torque with a roots type blower. Probably a decent build.
- Tue Apr 25, 2017 6:22 pm
- Forum: Non-Broncos
- Topic: My VERY mild DD
- Replies: 83
- Views: 6788
Re: My VERY mild DD
Wouldn't waste my time on doing heads or the top end unless you want to do a overhaul. Just replace the intake gasket and use black silicon in place of the end seals. Replace the T-stat and bypass hose.
- Sun Apr 16, 2017 8:33 pm
- Forum: General Tech
- Topic: Site for calculating needed gas springs
- Replies: 2
- Views: 250
Site for calculating needed gas springs
Others have figured out what gas springs to use and there are kits on the market for Broncos. If you were to do something different here is a site to help calculated the gas springs for the hood.http://www.gecea.com/hatchlifters/gas-springs
- Sat Apr 15, 2017 1:25 pm
- Forum: General Tech
- Topic: short course or Full 4 link
- Replies: 17
- Views: 2206
Re: short course or Full 4 link
I wouldn't get too wrapped up in the way to go. One of the advantages of the desert style is that you run shorter shocks and they have a slower shaft speed over any given bump. They will run cooler. That said you look at the buggies running at a near one to one and they work fine. Dependent on what ...
- Tue Apr 04, 2017 9:30 pm
- Forum: Whatever
- Topic: The Top 10 Bronco Fab sh*t I hate !
- Replies: 13
- Views: 885
Re: The Top 10 Bronco Fab sh*t I hate !
Steve, The right tool for the job. Snap on chisel has the power to get it done. Never could understand the whining about the rivets. They pop right out. Now the thing that sucks are #1 replacing the valve cover gaskets, #2 fuel pump on a full tank, #3 Door hinges with factory fenders, #4 getting the...
- Fri Mar 24, 2017 8:22 pm
- Forum: Big Broncos
- Topic: 89 Full Build Bronco
- Replies: 6
- Views: 1008
Re: 89 Full Build Bronco
Thanks for the heads up. That is a good price.
- Thu Mar 23, 2017 10:41 pm
- Forum: Big Broncos
- Topic: 89 Full Build Bronco
- Replies: 6
- Views: 1008
89 Full Build Bronco
Too good to die, she is back and in good hands but will be built quite differently. http://www.gofastbroncos.com/forum/viewtopic.php?f=33&t=3712 Basically a rebuild/build thread. Ended up with the chassis and a few parts. The rest of the truck was parted out. I am having to purchase some of the part...
- Fri Mar 17, 2017 7:27 am
- Forum: Tech
- Topic: 351w to c-6 with NP205
- Replies: 17
- Views: 2558
Re: 351w to c-6 with NP205
Old Ford Motorsport catalogs used to have engine building tips. The text below is from an add but it outlines one of the problems with the 400M. I remember reading about this mod after toasting the engine in my Dad's truck. Cheap fix. Another way to address it is to bush the lifter bores. One of the...
- Thu Mar 16, 2017 9:00 pm
- Forum: Tech
- Topic: 351w to c-6 with NP205
- Replies: 17
- Views: 2558
Re: 351w to c-6 with NP205
One down fall of the 400 is the oiling system, make the needed changes and then you have a solid engine. They make good power but are heavy for what they are.
- Sun Mar 12, 2017 8:23 pm
- Forum: Go-Fast Tech
- Topic: Frame Notches, Inner Fender & Hydro Bumps???
- Replies: 6
- Views: 630
Re: Frame Notches, Inner Fender & Hydro Bumps???
Check out CHO's build. He does a notch and adds pieces above the notch. Granted he is supporting with a cage, think your asking for trouble if not additionally supported by a cage.
- Mon Mar 06, 2017 11:28 pm
- Forum: Big Broncos
- Topic: Jr. Sr. Bronco Build
- Replies: 4
- Views: 694
Re: Jr. Sr. Bronco Build
Looks nice. May want to consider the solo cage with it!
- Mon Feb 27, 2017 2:47 pm
- Forum: Parts
- Topic: Camburg housing and Wilwood brake calipers
- Replies: 10
- Views: 733
Re: Camburg housing and Wilwood brake calipers
What is the total housing length about end to snout ends?
- Sun Feb 26, 2017 7:59 am
- Forum: General Tech
- Topic: Help..Factory fuel line to AN fittings/regulator/rails etc..
- Replies: 15
- Views: 832
- Fri Feb 24, 2017 11:53 am
- Forum: General Tech
- Topic: Custom Fuel Filler Neck/Tube???
- Replies: 10
- Views: 484
Re: Custom Fuel Filler Neck/Tube???
Careful on your diesel as the problem gets worse and the vent needs to be bigger. Diesel foams and creates pressure and triggers the pump off. Found this out on a diesel conversion. Had to get the neck designed for diesel as opposed to gas.
- Fri Feb 24, 2017 6:21 am
- Forum: Go-Fast Tech
- Topic: What are my choices for Bed sides ?
- Replies: 14
- Views: 916
Re: What are my choices for Bed sides ?
You can ask them to remove any questionably sexual vents and have them make straight style fenders for you. I am sure they can give it to you any way you like.
- Fri Feb 24, 2017 6:14 am
- Forum: General Tech
- Topic: Custom Fuel Filler Neck/Tube???
- Replies: 10
- Views: 484
Re: Custom Fuel Filler Neck/Tube???
This is a different style that may work for you.
http://www.fillernecksupply.com/gas-engine-1/
http://www.fillernecksupply.com/gas-engine-1/
- Sat Feb 18, 2017 9:10 pm
- Forum: Parts
- Topic: 92-96 front bumper
- Replies: 3
- Views: 190
Re: 92-96 front bumper
Are you going to be down around san diego anytime soon?