Well supposedly I have a short somewhere causing the ecu to shut off for a split second randomly while driving. The ground on the online diagrams says it’s G101 by battery tray.. now the two wires spliced together run all the way down the harness to the plug. But the other single ground wire is cut ...

Sent from my iPhone using Tapatalk

So truck is finished and took to dyno since I couldn’t get it to run (408w with 1995 factory Maf efi). Ended up not finishing tune because of misc sensor issues. Ended up stripping wire harness to check continuity on wires and go through harness and clean it up replace connectors etc. Came across th...

What lower intake were you running? Single plane?


Sent from my iPhone using Tapatalk

So apparently this is all out of date stuff, my street friends just informed me what to use for my 408w I'm building and the tuner said to ditch my stock ecu and tweeCEr and go and buy a DIY mega squirt, under 400 and there's another one for the trans controller also for under 400$ but it's a wire y...

Only1mikey has the square body bronco that's extended 2" with stock fenders, pretty sure that's what dtbback is thinking of


Sent from my iPhone using Tapatalk

Looking for pretty decent shape door panels for my bronco, hopefully grey if you got it! Located in canyon lake


Sent from my iPhone using Tapatalk

Still have these?


Sent from my iPhone using Tapatalk

Where are you located? Might be getting a call after my Broncos back together


Sent from my iPhone using Tapatalk

Are those wheel spacers set up to be hub centric with the ford 9" and a 17" rim?


Sent from my iPhone using Tapatalk

Dam that is a deal. I want the bedsides but won't drive to San Diego hahah glws


Sent from my iPhone using Tapatalk

^^ same here, I miss it when it had deavers and coilovers, was the best stage of being just built enough to dd it and drive out to the desert and come back after beating it http://uploads.tapatalk-cdn.com/20160223/f4ef53aa1df28882472e7733fba4780d.jpg Literally went everywhere with it http://uploads....

Here's my basic dash.. Turned out pretty cool, I'm happy with it, center console is still in the works and gotta finish the top panel

Cus I'm not obd2.. And don't want to convert. Didn't hurt to ask if he was going to separate since the other guy was interested in the harness and ecu. Oh well glws

If you were to separate what are you looking to get for the motor..

Can someone post the wire colors for the tbs on the main wire harness for the truck, think I messed up converting the egr dummy plug with The tps sensor. Yes I bet there are questions but a simple picture with the wire colors would be great, thanks

I'm very interested in carpet! Shoot if no body wants the mirrors I'll take that too! I'll send you my number, I'll throw a few bucks your way too

Do you have carpet? And what color

I thought they stopped making these......

Location?