If you're gonna do it, try to avoid fiberglass packed, those can burn out overtime and get pretty much just as loud/drone-y as before. Look for stainless wool packed ones if you can find em. They do work to quiet things down, and do so even better when placed farther back in the exhaust stream. I on...

Any progress on yours Yogib?

Weird. The longtubes I had on my 302 cleared the front driveshaft just fine, seems like those spread out toward the frame too much.. I hope that rubber hose in the picture with the cat isn't for fuel!! There is very little play in it. I can't move much around because it's all welded together beside...

Weird. The longtubes I had on my 302 cleared the front driveshaft just fine, seems like those spread out toward the frame too much.. I hope that rubber hose in the picture with the cat isn't for fuel!!

Can't wait to see some pics!

I called them, and he said that while these units are made using in-stock parts, they are actually custom made for each order. So in fact, they will make the spacing between the two tubes to our spec. Also, you'll notice that the 3" single outlet side has no flange to clamp the hose on, but they wi...

Yeah, I may just take this one http://www.mandrel-bends.com/catalog/collectors-x-pipes-t-s-100/parallel-2-1-merge-collectors-117/2-1-merge-collector-parallel-2-25-inlets-3-00-outlet-304ss-1491.html and have the 3" out flared to suit, but it kinda depends on whether or not the dual tube spacing is go...

Sweet!!

Yogib, what size MAF are you using?

Sydude, I'd definitely be interested in ordering something similar to the drawing I attached above!

Drawing based on measuring my 61mm BBK with calpers.

Seems like a fair price for a custom fabbed stainless TIG welded piece, I'd be willing to pay it.

I'm whipping up a model/drawing of what I'm hoping for...

I'm looking to make or get one made that has a 90mm MAF side and 61mm TB side with 15/16" gap

Edit: got it! no longer need

Looking for BBK #3503 twin 61mm throttle body. New or used.

Yikes, if you decide you won't be using your VMV anymore, I'll buy it from ya'

In case anyone's wondering, here's what da' law says in CA: http://www.arb.ca.gov/msprog/aftermktcat/exemptcat09.pdf "New Label Requirements The label on the catalytic converter shell must be ½ inch high and large enough to be read from a distance of 5 feet from either side of the vehicle. The label...

Thanks for the reply and the Curt p/n! How much can you get that one (31026) for??

Aware of any that fit the non-accordion frontends like on my buddies '90?

Has anyone tried to fit the Draw Tite / Reese 65015 front receiver hitch on a Bronco? They're listed for 4wd 90s f250s and f350s.... Are the frames substantially different in front between the 3/4 - 1 ton vs the 1/2 ton trucks???

No prob! Was a good chance for me to get more familiar with ford wiring in general. Now I feel all inspired to go removing/adding more stuff. It'd be nice to ditch the non-important cruise control wiring and add in the compass/outside temp sensor and interior overhead console...

Amsoil EaAu (http://www.amsoil.com/storefront/eaau.aspx) or AFE Dryflow

Well, The lighting didn't work out for shit, and the camera I'm borrowing is too large to snap a real good photo. I'm postin up what I got, but they may be of little use to ya :oops: I might be able to get you a better picture once I've removed the dual exhaust pipes that I don't plan to use anymore...