I'll post up the inside measurement on the shackle hanger as soon as I get home this evenin'. No rush at all, I really appreciate ya' helpin' me out on this!

Calipers, chop the stock mounts off and weld on some tabs for good calipers.

You make it sound so easy If somebody offered that weld job at a reasonable price i'd do it.

Got the folding center seat but need the mounting bracket for it. It's a formed/stamped piece that gets the center seat at the right height instead of halfass mounting to the floor. Lemme know if ya got one or know where to find one. Thanks!

No problem, thanks!

Schweet, lemme know the price shipped to 94566, CA and your paypal addy and I'll send the funds.

Haven't seen any with less drop - only more. Sorry.

For sure, I'm thinking that length (in your pic) might work perfect.
Do you have any of those you're lookin' to part with?

Alrighty, thanks anyways Hobbyturnedobsession

ChaseTruck, lemme know when/if you get a chance. Thanks

Thanks!

The ones in the pic above are off a 91 dodge pickup. Get a chance to look at just how much longer they are? Started thinking about it and it may actuall work out fine if its 3" longer. My logic is that I'll be running a 1.5" longer front hanger and the extended shackles will kill about 1" of ride h...

@Sydude I was just asking about the "shackle hanger" (or whatever it's really called ) that Chasetruck is showin' below. That said, I really appreciate the links to the extended camburg shackles. I had just PM'd the camburg guy on his FSB account a day or two ago asking about whether they still have...

You guys know where I can find a 1-2" longer than stock rear shackle hanger?

zeee bump

Only looking for a bad driver side signal mirror to take the glass from at this point. Have everything else I need, though would still buy a complete drivers side.

So would you guys say it's safe to assume the J40's will sag to something like 5" lift?

Sydude, are your Camburg shackles the 6" ones that require some amount of frame modification?

I'm trying to get my research done before I buy. I have the 4.5" Superlift lift leafs with 3" blocks (3" on the fat end in back, ~2.5" on the front) on top of the factory wedges and lil pinion shims. My truck currently sits even with the totally unused 5.5" deaver coils I put in front, and with the ...

No prob, PM or email (monkei@juno.com) an address to send it all to.

Sorry I'm laggin so bad, crazy week. If you wanna just paypal $30 to monkei@juno.com I'll get it shipped to whatever address you send.

PM me your zip

I have one. Do you need the shorty tubes between the y-section and the TB bores as well?

Like one of these?: http://www.advanceautoparts.com/1/1/608 ... 53125.html

I don't think a lot of people use Helmholtz style on "performance" exhausts...