Looks good Randy! Good on you for learning a new skill.

Sent from my SM-G960U using Tapatalk

Time for some shock service. Ordered 2 seal kits from shockseals.com for my SAW 2.5s on the rear. Thanks for the coozie Kritter! https://uploads.tapatalk-cdn.com/20200320/e5b46e64f5a48a12d9ced72a546cc4bb.jpg https://uploads.tapatalk-cdn.com/20200320/587298d4c939993abfde20b707534b06.jpg https://uploa...

Vacuum all the loose dirt out. Simple green and a scuff pad to clean the old grease and grit off the parts that move and touch. Then a thin coat of grease (whatever is in my grease gun) on those same areas once they're clean. I move the glass down half way to get all the surfaces cleaned and re grea...

Annual window motor and gear service today. Also installed 8/32 nutserts in the shitty old wood screw holes that hold the access cover down. Came out tits. https://uploads.tapatalk-cdn.com/20200319/5dbfbbf13000a20e95bb0d309757e9bf.jpg https://uploads.tapatalk-cdn.com/20200319/0c1f5cb12fc7e69d53e3029...

entity-unknown wrote:I was up there yesterday. I live in East Mesa so Sycamore is kinda my backyard. Where you at? Wanna trail sometime?

Power and McDowell. Ya im down anytime.

Sent from my SM-G960U using Tapatalk

Quick run out to sycamore Creek to check out the water flow after all the rains. Lots of traction and lots of skinny pedal!

Sent from my SM-G960U using Tapatalk

The round ones are pretty sweet I love the low profile of them. Picked up 2 new husky totes from home depot too. My action packs were hammered and cracked. The hunskys are nice and like the clear lid, they also fit 2 wide on my table that goes on my spare like inthe above pic for gofast trips. I’d ...

The round ones are pretty sweet I love the low profile of them. Picked up 2 new husky totes from home depot too. My action packs were hammered and cracked. The hunskys are nice and like the clear lid, they also fit 2 wide on my table that goes on my spare like inthe above pic for gofast trips. https...

Installed my new tie downs today from uscargo. They're the aviation style spring loaded type and worked out great. Getting ready for the SF250. https://uploads.tapatalk-cdn.com/20200312/85ffc788cf7027abff3c06c407e5a5bc.jpg https://uploads.tapatalk-cdn.com/20200312/5a206d92bfa192e6b79f4297b052c4d3.jp...

While I appreciate the input, you're a little off base. Let's get this thread up to speed on the motor details. This tune will pass smog which is why the power numbers are conservative. Next year may be a different story... 408w Eagle forged internally balanced crank Eagle H beam rods JE 9to1 pisto...

While I appreciate the input, you're a little off base. Let's get this thread up to speed on the motor details. This tune will pass smog which is why the power numbers are conservative. Next year may be a different story... 408w Eagle forged internally balanced crank Eagle H beam rods JE 9to1 piston...

so once all the wiring is eliminated, will the brakes still operate with leaving the ABS pump system in with the factory brakelines running thru it? until I would have the time to build new brake lines... Your brakes will work with abs pump still in the system, mine ran that was for the last 10 yea...

Awesome! How's the sound deadener working? It makes long drives much more tolerable for sure. I’m glad I took my time and thought out all the different layers and materials I used. Amanda even commented how much nicer it is to be able to talk and not raise your voice going down the road. After this...

I've been putting weekend miles on the new motor and I'm very happy so far. Took the wife and dogs up north this weekend to play in the snow and cover some ground on forest roads. I live at about 3000ft and we went up to 11000 this weekend and the bronco ran great. https://uploads.tapatalk-cdn.com/2...

https://www.custombatterycables.com/f150-bronco/ I've seen that kit, but looking at my factory harness, there's a lot more going on that what his little pictures show. If I'm gonna re-do part of it, i want to just re-do the whole shebang. Plus I plan on running a full gauge Anderson plug connection...

I had Aamco build mine and they did steel planaterys and Z-pac intermediate clutches. Came with a 3 year warranty. I highly suggest a valve body from Punisher also. Sent from my SM-G960U using Tapatalk Thanks, I'll def consider the Punisher VB. Seems AAMCOS are kinda hit or miss. Which AAMCO did yo...

I had Aamco build mine and they did steel planaterys and Z-pac intermediate clutches. Came with a 3 year warranty. I highly suggest a valve body from Punisher also.

Sent from my SM-G960U using Tapatalk

Looks good Will!


Sent from my iPad using Tapatalk

That looks like like a slice of heaven. Idaho is on my list. Sent from my SM-G960U using Tapatalk It sure is! I'm in a pretty good location here to have quick access to LOTS of mountains and wilderness. The landscape, climate and wildlife throughout Idaho is pretty insanely varied. Funny that you s...

That looks like like a slice of heaven. Idaho is on my list.

Sent from my SM-G960U using Tapatalk