Now I just gotta figure out a replacement

Sent from my VS988 using Tapatalk

Depends on your location, these things are so cheap the cost of diesel to drive and get one makes it hard to offset cost. I am between Sac and Reno, I drive to Merced and the bay area all week though.

Sent from my VS988 using Tapatalk

Pulled the pan...Bottom end is shot, way to much slop on the rod bearings, can literally grab and rattle them around...then spin it to lock and they don't budge. No main play but can see evidence of piston hitting the crank on a few cylinders....was gunna pull the heads to see what else is wrong but...

Haaaaallllppppp Well...got the oil pan on, everything clean, did a quick visual on the bottom end, nothing looked out of the ordinary. Buttoned up my top end stuff, and had her ready to fire so I pulled the plugs and got all the soaking atf out the cylinders that I put in along time ago so the cylin...

More things being done 1 night at a time... https://uploads.tapatalk-cdn.com/20180713/6458429ccaf30c8c01e118fa19b53a28.jpg https://uploads.tapatalk-cdn.com/20180713/74d9647033de330f42ba30a0f1e64e11.jpg https://uploads.tapatalk-cdn.com/20180713/4cb72a2c3a59cce16358640b3d126373.jpg https://uploads.tap...

Valve covers done, trying to get in a couple hours a day on it, welded in a nut on the pass side pcv and put a bolt with O-ring in it in case I need another port in the future...welded -10 fittings in the front of both valve covers then sleeved the oil fill tube for easier access. Also got a trans d...

Fuel pump in, valve cover's coming off for the PCV system https://uploads.tapatalk-cdn.com/20180629/2327dcc414f8639e8ffeb4bb0b957f41.jpg https://uploads.tapatalk-cdn.com/20180629/c00b8a97ad364b8f3750319e6fc65559.jpg https://uploads.tapatalk-cdn.com/20180629/fb355405cb4e197605bcd9003561c4e6.jpg Sent ...

Started in on the fuel system, luckily this thing has an OE Ford van tank, bolting on a 255 wahlbro and deleting the two low pressure pumps for now...anybody need two low pressure pumps and a regulator https://uploads.tapatalk-cdn.com/20180627/07b01b36b9ffe2fe1594cf23e899d61d.jpg Sent from my VS988 ...

funinthesun95 wrote:it coming together nice.

Thanks...ready to trade yet

Sent from my VS988 using Tapatalk

Progress

Sent from my VS988 using Tapatalk

Final piece to the piping puzzle is this aluminum carb hat my buddy built me...gunna look good all polished up, next up is starting on wiring, already got a good amount of parts built up so I am hoping to be close to atleast firing it up even if she doesn't move quite yet. https://uploads.tapatalk-c...

Broncos are stupid

Sent from my VS988 using Tapatalk

Mailman showed up today

Sent from my VS988 using Tapatalk

dtbback wrote:What's the gap to the frame from top of the beam at bump?

I can check this weekend for ya

Sent from my VS988 using Tapatalk

the temp probe would mean it heating up so it not working kinda thing a warning sign? copy looks like I have a new go to for question on this as you have owned them....I forgot you told me about the Harley you had. You either need a way of readily monitoring your downstream IAT (Intake air temp) af...

Very nice, what's your plan for fuel pump, intercooler, and gauge cluster? Sent from my VS988 using Tapatalk current set up is Dual Bosch pumps I will check flow on them. I will add a liquid tank for the stock intercooler and place heat exchange in front of radiator or maybe back with tanny coolers...

Full bump shots...was fun having my boy out there hanging with me in the garage in his little truck, hoping to have this done by the time he's like 29 lol. https://uploads.tapatalk-cdn.com/20180605/e1c081a14e6ff16dfbce844731acb2ef.jpg https://uploads.tapatalk-cdn.com/20180605/6440336e7e79ed49a79e347...

It's just some off the shelf spray on stuff you can buy at some automotive supply paint stores or performance shops, probably not as good as having it baked but I plan wrapping it the downpipe and pieces that are close the firewall/valve cover/hoses, etc. I am out of town but I will try to get the p...

Very nice, what's your plan for fuel pump, intercooler, and gauge cluster?

Sent from my VS988 using Tapatalk

I love me some ceramic

Sent from my VS988 using Tapatalk