I will take that offer. Call me I’ll be by Sunday night to get it.

Thanks for doing all the work on my bronco, I’ll swing by to pick it up later

This came out of a truck with 160k on it, I rebuilt my motor maybe 4-5,000 miles ago. I’m thinking maybe E303 cam, use the Lightning’s gt40 heads, Edelbrock intake and sell the rest. So basically just use the gt40 heads from the lightning. My buddy wants the intake and my father in law wants the bot...

https://uploads.tapatalk-cdn.com/20180922/e570bd2dfb0846950105987ad5219535.png https://uploads.tapatalk-cdn.com/20180922/5d52fe46fa597128f7447e5b71f66aba.jpg So I bought this running 5.8 lightning motor out of a 95 f150, i dont know why I bought it yet but it was cheap so I just did it haha. I alre...

I was recommended this pump
https://www.summitracing.com/parts/bch-61944

And told I do not need a regulator than the stock one will be fine


Sent from my iPhone using Tapatalk

Suggestions on which electric out of tank pump and regulator to use with my 351? Getting a fuel cell soon so I need to figure it out


Sent from my iPhone using Tapatalk

Okay so currently I have a 351 that’s stock other than the edelbrock upper and lower intake, exhaust, and I had a custom tune put on the truck. It’s only putting down 170 to the wheels right now. I was going to do a LS swap but now I’m thinking I’m going to link it next summer instead. Anyways to my...

I was hoping it would! Especially for jump champs I can use less body roll.

Got part #s on the new spring bushings? Yeah it’s tanner287164819 Lol I made them myself I’m not aware of anyone selling them. Sent from my iPhone using Tapatalk Autofab sells them, if you don't mind red. Well that’s cool I did Not know that! I had this delrin leftover from something else so these ...

ChaseTruck754 wrote:If you made them assuming you did them out of delrin?

Yes I did make them out of delrin, don’t have much driving time on them and maybe it’s my imagination but I feel like it tightened everything up. Felt like less body roll I liked it

dtbback wrote:Got part #s on the new spring bushings?

Yeah it’s tanner287164819

Lol I made them myself I’m not aware of anyone selling them.


Sent from my iPhone using Tapatalk

The first one was solos, but I know they have since changed their design to be stronger. And yeah I made all the new stuff.

Pismo was a blast, but I broke my bedcage on the last day. Decided to cut it all off and start fresh. Was able to push the shocks out on the axle a little further and do some other stuff like downsize the bump stop pad and give me a whopping 1/2” more of up travel. And made some new bushings for the...

Even with the awesome heat we had this weekend I wanted to get the truck done. It’s back on the ground and all good! I made the first set of tie rods out of .120 wall with weld in bungs but the final ones are tapped .313 4130. Pretty stoked on how everything came out. https://uploads.tapatalk-cdn.co...

https://uploads.tapatalk-cdn.com/20180702/df868bac361fb8228e6eacfb9920f6c6.jpg https://uploads.tapatalk-cdn.com/20180702/ed4dbb0755043b66f3df89c5fe1a5d82.jpg https://uploads.tapatalk-cdn.com/20180702/2730c15c8cbea0fdc4500a9e89dd0c23.jpg So steering went pretty good this weekend. Everything is cycle...

Yep good times!!! Hahaha got another set of knuckles from dtbback and Solo is going to double sheer them for me. Iv had enough fun with the knuckles and just want the steering done lol


Sent from my iPhone using Tapatalk

Yeah main boss is pissed. Told me this is a “fireable offense and any cost from this could be pushed to me” I told my manager what he said and she went and spoke to him and came back and told me don’t worry about anything he said it’s done and over you did nothing wrong. I told her if I’m expected t...

Yeah in the old building they would take the oven to 600* just havn’t used it in the new building and I was lucky enough to be the one who used it first.


Sent from my iPhone using Tapatalk

Well... had a slight set back... Put my part in the oven at work which is rated for 700 but our safety guy doesn’t want it taken over 500. So he put a label on the side of the oven do not exceed 500. All good I had the person in charge of the department with the oven put my parts in and he put it to...

Well kinda bummed, Robert suggest to use a er312 rod so I had ordered that first of the week, was supposed to be here Thursday and it wasn’t. Tracking hasn’t updated so I don’t know if it even will be here today. Any other rods I can use to do this with? No one around me had the 312 in stock Sent fr...