SteveG wrote:Doesn't it have one in the factory instrument cluster?

Actually yes it does but not sure i trust it as this bronco has been ran through if you know what I mean. PO did a whole bunch


Sent from my iPhone using Tapatalk

What’s the go to route for a oil pressure gauge? I think I would want one right? Maybe some more gauges. Not sure where it connects to though


Sent from my iPhone using Tapatalk

pat_car22 wrote:I have a rear seat if needed. Text me 805-235-1608 located San Diego

Thankyou I actually need front seats, the ones i have are torn to bits and have broken mounts. I welded for now but I’m a big boy on some crap seats/mounts


Sent from my iPhone using Tapatalk

I was hoping for pics of them but I need the body side more so than the engine side


Sent from my iPhone using Tapatalk

Does it have the vacuum lines?


Sent from my iPhone using Tapatalk

LvSteve wrote:I have a spare rear glass. PM if still needed

For some reason I don’t have enough permission to send a PM but if you can text me I’d appreciate it 951-532-7477


Sent from my iPhone using Tapatalk

Hey everyone, anyone have a line on a rear tailgate with glass or at the very least the glass? I’m looking for either one. The glass on mine was broken.
Also looking for seats too let me know.
thanks much!
Brian


Sent from my iPhone using Tapatalk

Just curious. Does the VIN tag tell you if the rig was a CA or US one. CA ones should not have the air pump just like all 96 ones. 95and 06 CA rigs were the same regarding emissions. The 95 CA rigs are few. Regardless with respect to differences between 95 and 96 there are many other differences. I...

Just curious. Does the VIN tag tell you if the rig was a CA or US one. CA ones should not have the air pump just like all 96 ones. 95and 06 CA rigs were the same regarding emissions. The 95 CA rigs are few. Regardless with respect to differences between 95 and 96 there are many other differences. I...

https://uploads.tapatalk-cdn.com/20191011/713f56ac916c9915a59bc25acc358aca.jpg So this is what I put back on, only issue is I have no where for this tube to hook to insight. Not sure if it was cut or what it’s called. But I assume it goes to exhaust or atmosphere? Sent from my iPhone using Tapatalk

No smog related stickers on the core support. Haven’t seen anything on either hood that I have either. I found a system for the pump that works. Only thing I don’t have that I know I’m missing is there is a tube(metal) inch thick that I’m guessing matches up to the exhaust somewhere Sent from my iPh...

My GUESS is one is a CA setup and the other is not. Again, look at your emissions sticker under the hood. That is what the smog tech will look at when doing the visual inspection on the truck. If it shows on the sticker & is not there under the hood it's a visual fail. Ok I will do that, it will be...

https://uploads.tapatalk-cdn.com/20191009/42b8a0d5e66f77e3f0e71f8712ec9192.jpg https://uploads.tapatalk-cdn.com/20191009/743b1289f387639f7e037237cbc28a60.jpg I have these two set ups. One needs to go tot he back it the heads and has no manifolds. And the other attaches to the manifolds Sent from my...

It had a 5.8 before the swap and a 5.8 is going in. I have one set of headers that have crossovers and all that plumbing into the headers. But the other set does not have any of those provisions. Just the valve from the throttle body to the passenger side front of manifold Sent from my iPhone using ...

I am trying to piece together my 95 bronco with a 5.8. Issue I am having is with the air pump. What’s the best way to deal with it? Leave it? Or delete it? Take it apart and mess with the vanes inside? My other issue I’m having is that my headers (stock) do not have any provisions on the back side f...

And if your deciding on what to use for wire harness and computer. Definetly go with the 1995 Maf obd1. I have a stroked 351w with a 90mm Lightning Maf and 47lb injectors. Runs like factory with no check engine light after I got a tune( I removed emissions so caused a check engine light) Sent from ...

Skindirtbronco wrote:Free stock bench seat out of 94 bronco 714 655 3552 located in hb ca

Rear bench seat? Or front?


Sent from my iPhone using Tapatalk

biggiek wrote:What year is yours? The top one is for the 96 obd 2 vehicles and second one is for all obd 1 vehicles.

Mine is a 95. I’m still trying to figure it out. That too one came out of a 94 bronco


Sent from my iPhone using Tapatalk

Ok so still putting this thing together. I think my 1995 bronco was a MAF bronco. I have notices of my two engines there is different egr valves and I don’t know which one to use. Which would then dictate which harness I use on the engine. Also need to pick up a MAF intake https://uploads.tapatalk-c...

On the stud stuck in the head deal - watch this for future reference. The drilled socket bolts this guy uses are something I plan to make & add to my arsenal! https://www.youtube.com/watch?v=dJfkCj3FWBs That was some good info! The right tools and patience. Neither of which I possess. Definitely ne...