So with the extra air flow you have ! Where are the 24lbs injectors , the v10 tb , And a 04 f150 mass and a ADS tune in S Chander
Steve G The ford guy...Retire Ford Racing. If you need help let me known

Thanks HOONracing , Mac Pacesetters and obx all are making big tube pipes, I went with the obx after having great luck on a gt500 and a z06

After extensive searching through all the online forum groups I could identify, I have not been able to find an acceptable mid-length or long tube header combination. Many people speak about the jba, bbk, bassani, gibson and other brands. None of these headers truly give the complete mid range perfo...

Looking for info on a pcm relocation on a 96 , Photos or links

A budget 408 build
http://www.musclemustangfastfords.com/t ... ewall.html

anybody need a nice short block ?

http://forums.corral.net/forums/windsor ... block.html

Pcm upgrades

http://www.promracing.com/pro-m-efi-eng ... ystem.html

or a new pcm and harness

http://www.promracing.com/pro-m-efi-eng ... -kits.html

efi upgrade info . full artical Muscle mustang & fast fords 10/13 page 70
http://www.promracing.com/pro-m-efi-eng ... ystem.html

So Was a price ever set for another cage to be done ?

Take a look at this actical

http://www.dragzine.com/tech-stories/en ... w-stroker/

The best pcm upgrade i have used over the years has been Mark at http://www.tweecer.com/ His system is very Dyno friendly and self tunable. Just tell him what you're doing I pass smog in NV with no egr and pump 351w stroked to 408. 95 roller block 195 afr heads 55cc chambers 42 lb injectors 90mm mas...

A 5.29 is the max in a dana 44 in the 93 order guide, was only in a open carrier. in a fsd vin #f47

So Mojo 96.

What rpm are you turning at highway speeds with the 4.88 gear in od ?

The Best i have used was a true flow XDI intake system, It was a off shoot comp of airad. There system was a foam filter. Jason Cobb with team Honda ran the comp in North Valley phx az. It has closed the doors now, You can still get some of there stuff at X. There stuff did the best on the dyno, han...

Try looking here for your used frt diff. Look in the rust belt for 93 f150...... http://car-part.com/

just found a link for adapters that may help

http://www.woodys4x4.com/Adapters.htm

Ford had a updated brace for pass dash vibration. There was a tab in 96 or 97. Was used on trucks also

Hi to all Found a link to the site on Race Dez. Am starting my 5th full size bronco project with a 95 xlt for dez, a 96 eb for rock racing ? My name is Steve G also.... Was known in the industry as Steve G the Ford guy, Go USC Over 31 years with Ford Fleet , Five years Ford Racing and service manage...

a very important issue that has not been mentioned yet is the fact that the E4OD is wider then a C6 and the NP205 is short in length and width. Meaning the front output is closer to the trans. The E4OD and NP205 don't play nice together..... I put an E4OD in my 87 reg cab short bed F150 and couldn'...

Rmc wrote:My wheels: 17x8.5 w/4.5 bs, they clear 3.5 glass at 4.5 extended beams and stock beams clears fender very little rubbing ( my friend has the other half of the set of 8 on his bronco)

What brand are your wheels and tire size ?