To you also [emoji106][emoji41]

David

Axle is all welded up! Next it will be getting a back brace some mounts and figure out what I’m doing for hubs. Nice, I have toyed with the idea of doing my own 9" full floater. I hope to get a new fixture table this next year and it would be perfect to keep everything straight while welding things...

I wonder what guy's running paddle tires do for front tires. Is anyone running paddles up front also? I was considering straight Hooked paddle tires in the rear, but a desert track style from Sand Tires Unlimited. Not sure yet. I plan to run 37's for hard packed, maybe 35's for the dunes. On our old...

I have a set of New Dennis Carpenter lower quarter panels that are uncut. Great quality. The reason I am selling them is that I decided to go with Cut and flared to fit bigger tires for Off-Road. I know I can cut these and if I don't sell them, I may do that. I was considering fiberglass lowers. We ...

Also, What is better for the Bronco, Deaver Q80 or J40. Or are both just ok. Whats the difference? I am leaning 64" from Geoff Falzone or 3 link. 3 link would be cheaper for me if metal prices stop going through the roof and the 64's would be $1400 for the leaf pack. I can fabricate everything myse...

Also, What is better for the Bronco, Deaver Q80 or J40. Or are both just ok. Whats the difference? I am leaning 64" from Geoff Falzone or 3 link. 3 link would be cheaper for me if metal prices stop going through the roof and the 64's would be $1400 for the leaf pack. I can fabricate everything mysel...

I'm bringing back this discussion. How are the TTX ball joints holding up to abuse on the Bronco's??? I have always used Napa Blue boot ones. But it's time to rebuild my beams. I already converted the pivot's to Uniball. I was looking at the Desolate Extreme Terrain Ball joints and the RCV ball join...

Nice, I have a CT330 stroker motor in my 250r. I completely rebuilt it, split the case's and put a NOS CT top end. I have a 2006 Honda trx450er with a stage 2 hot cam I ride now and love it and electric start is nice now that I am in my 50's. I have too many toy's, I have the 450, a 400ex, a 1990 Ya...

I am remodeling the house and we have everything in the house going in the garage. Now the 72 Bronco is being overtaken. [emoji3064]. With my back problems I worked out a deal with a friend to do the heavy lifting when doing the 72 Body on the 86 chassis. Before I chop the body, I need to take the 7...

I may have to look at Cho's steering and see if I can copy it.

Anyone have any pictures of crosover steering with straight tie rods like Cho's or other?

David

I know this is a old thread, but searching Tire Rod stuff is not working for me. Has anyone used a offset heim joint tie rod end on their steering. It might help with clearing a swing set setup and make it so no bend is needed on the cross over tie rod. I was thinking to use them at the knuckles. An...

One thing I was told and have always done is run 200 psi of Nitrogen. The pressure really is for cavitation and keeps the oil stable without expansion. The Nitrogen psi is not like an air shock for ride height. I don't have them on yet, but I am putting some King 3.0x18 king shocks with a single ble...

Thanks Todd
A bit high priced for what I need and in a lot better shape than what I need since I am going to cut them up.

David

Hey guys, I am looking for Early Bronco fender, both sides. They can be crunchy and dented. I am stretching the front end about 6 inches in the middle of the wheel wells. So I need 8 -10 inches of each wheel well.

Let me know what you got.
Thanks

David

That would be cool under a Bronco Body [emoji41][emoji16]

David

Hey guys I am looking for a 1995-1997 F250 front knuckles Brakes hubs locking hubs and axles to the third member. I don't need the Dana 50 differential or housings. I am making a hybrid Dana 44 / Dana 50 extended +3" per side with Dana 50 inner beam ends with D44 housings and Dana 50 axles and 1350 ...

Hey Rod You still looking for a front D44 ttb third member? I have a open diff in my 86 Bronco with 4.10 to 1 gears by Pro Gear in San Diego CA. It has worked great and is still in my 86 Bronco. I would ask $400 for that. I am pulling that out to put in a 1982 third member with the 3 hole bearing re...

I am seeing what might be out there in someone's garage they want to get rid of. I am looking for Ford 351w AFR 220cc heads with a 56 or 58 combustion chamber. I want to stroke a stock 351w block to 408w and shoot for 550hp and torque range at 3k to 5k rpm. Or close on pump gas. Used in good conditi...

I am thinking of a recliner seat for my 72 Bronco, so it is easier to get in the Back Mastercraft bench seat I have. I have all new Mastercraft +4 wider grey and black original style Race seats already, but I am not sure about crawling over center console and front seat to get in back.

David

Ok, question? And Maybe Paul can chime in, who makes a air compressor with 7cfm or higher that can be placed in the AC compressor spot on a 1989 351w? My thought is to get one of those 12v electric Air Conditioning pumps and remove the stock AC compressor. I have been told they don't make much press...