I am just wanting to buy the bracket for a 351w.

David

bump, i currently have two 5.0/5.8 in stock and two heading to sandblast/powerdercoat Are these brackets for P Series Saginaw Pumps? I was looking at the PSC P Series 1600psi pumps for a remote reservoir setup. I am running a 2005 Superduty Hydroboost and plan to run a ram assisted steering. Do you...

Well, I did it again, bought a new tool. I just got a killer deal on a Arcdroid CNC robotic Plasma cutter system. I also picked up the x2 extension to double the area it will cut. I even got Titanium 65 amp Plasma cutter with CNC controls. That will be dedicated to the Arcdroid and my old Miller Pla...

Thanks

David

So I was wondering if a dually rear axle with normal srw rims would work to get a wider full floater rear end. Does anyone know the width of a dually axle wheel mounting surface to wheel mounting surface

David

Right now, I am debating on pulling the trigger on a Dart Block and a 427w stroker kit. I was given a price of $4500 for the kit and the Dart Block. Both are new, but have been sitting in the garage and were from a project that never happened. I am shooting for a 550hp range with the torque around t...

Thanks, the prices are just going through the roof on motors. I just got a lead on a Dart Block with a 427w stroker kit, but unassembled and the block still needs finish machine work. I offered him $4000, but he would not budge from $4500. I know it's not a bad deal, but it concerns me knowing I sti...

Ok, I ran JBA shorty headers on my Bronco 302. I have a set of 351w JBA headers that I planned to run. Now that I don't have to worry about the biannual smog, I was thinking about long tube headers. I have to rebuild the engine cage anyway, so mocking up with the headers would be a good time to make...

Hey Guys I am widening my search for wheels. First choice would be a 16.5x9.5 8x6.5, 5 slot mag wheels with beadlock. Looking for used. Then a 17x9 8x6.5, 5 slot mag wheel Old school Walker Evans Slotted beadlock Any 5 Slotted beadlock 17x8.5 with 5x5.5 or 8x6.5 wheel My holy grail wheel would be a ...

That is awesome. What drone were you using and was it a automatic follow you setup or was it manually controlled by someone? When I get my Bronco back in the dirt I want to get a drone that follows you through the Dunes and desert.

David

Having a fire breather built for the unicorn! https://uploads.tapatalk-cdn.com/20200605/679fdf91063fa549f544c325a15793de.jpg Sent from my iPhone using Tapatalk If you don't mind me asking, what did the long block cost on your new motor? I was looking at an ATK 408 long block and they went from $480...

I have been looking at 14 bolt full floater axles with factory disk brakes, 4.10 gears and a factory Locker. For $1200 from a guy up in Anaheim. He has a big stock of them and ford axles. I would love to go with a Superduty full floater with a E-locker, but then I would have to change the lug patter...

Interesting. I think swapping the beam ends from a D50 sounds easier, but I have year's of welding and fab experience. I have a set of D44 beams +4.5 that have permanently welded radius arms. It would be nice to just have a simple bolt on 8 lug swap with bigger rotors. I am already going with a Supe...

DSD502 wrote:I did the K20 conversion and yes they will need 16 wheels to clear. I went with 17 to accommodate cheap take off tires.

What year and model vehicle for the K20 and does it bolt directly to the D44 TTB?

David

Great Idea! [emoji106][emoji16]

David

I have a new favorite welder I want to buy. I would sell my Miller 250 Mig and 180 Tig welders to help with the new machine. I like the new Everlast 3000 watt Laser argon welder. It welds 3/8" thick steel and aluminum, cuts the same and it removes rust and scale from metal. It welds really clean and...

Thanks [emoji106]

David

Doing so will slow down the steering. Can speed it up at the pitman arm, but then the added leverage goes away. The real issue for me would be what it does for the Ackerman? OEM is not terribly great and I'm guessing that Ackerman isn't important to those who make those parts, so it probably suffer...

Sold

David

Has anyone put in a High steer type double sheer setup on the Dana 44 TTB knuckles. My though is to push out the tie rod, so it does not need to be bent. Also, it might give more leverage turning the knuckle. What are your thoughts. https://uploads.tapatalk-cdn.com/20240419/0c82fb8e74c259412fc7c6bae...