Anyone running the method 701 trail series 17x9 wheels on a stock width bronco ? I like the styling and bead grip idea of this particular wheel but cannot find if anyone has used them on a bronco . Not that it matters but 96 xl stock width cut and turn coilovers 2” bumps

Does anyone know how the new live valve raptor shocks are controlled ? Is it just a matter of voltage or resistance. The non live valve shocks are getting harder to find and I was curious if maybe you could just wire them up to a switch or resistor .

Thanks guys I’m going to try and tack the lower mounts in when my shocks come in . I’ve also got a pair of 2.0x2 bump stops so I’ll set them up for 2 5/16 from the frame .

That is almost exactly what I thought I am running factory 7.5 Alcoa’s with 35s thank you for the info I believe my tabs are a tall and a short.

With all the shutdowns I’ve had time to pull my front axle out clean the frame up and install my solo motor sports coilover hoops and cross bar .my question is can I loosely install my cut and turn beams to weld on my lower mounts or should I have them loaded with the pig and shafts . I’ll be runnin...

Sold

Setting up the rear of my truck 96 xl I’ve got deaver j40 leafs , threat extended shackles and lowered hangers , threat shock mount for 12” shocks and gen2 raptor rear shocks . I’m only getting about 1.5 inches of droop before maxing the shocks out from ride height ? Seems as though it would be more...

I’ve got a stock width front end I’m putting together with a set of threat motor sports boxed radius arms . Also picked up a set of 35/12.5/15 km3s I’ve found a set of the 7.5 Alcoa wheels I know the width will work but anyone know if they will rub the arms ? Not that it matters but I’ve also got Mc...

Bought these used and may go in a different direction if I can sell them . King 2.5 ibp coilovers exposed shafts measure 11.5” overall length is 33.5” , has finned reservoirs and compression adjusters 29 clicks . Everything looks in great shape looking to get $1300 shipped lower 48 text 2484964868 f...

That’s what I would have thought too but this measurement is from the base of the shaft at the dust cap down to where there’s end starts ?

I picked up a set of 2.5x12? King ibp coilovers with finned resis and adjusters . I put 12? Because with the shocks fully extended the shaft measures 11 1/4 is that normal ? I plan to get appropriate springs and run as is too see what way they need to go as far as valving goes.

Sold

Price drop $400 shipped

Just the locker

Just the locker

I’ve got a slightly used 35 spline Detroit for a ford 9” I may be going a different route so looking to sell it $450 shipped lower 48 text 248-496-4868

I’m starting my build I’ve already got my rear set up ( deavers , extended shackles , under bed shock mount with gen 2 raptor shocks) but with regearing both diffs I may be coming short on funds for the front as I wanted to do coilovers . For my front I’ve already got a set of cut and turn beams wit...

The purpose of my build will be a street driven trail/dune truck . Just looking to soak up the rough stuff at a decent speed . Truck will also see winters on occasion so the race stuff is probably out for me due to temps with the viton seals. Looks like I’ll be ordering a set of 2.5x12 fox factory s...

They suggested I stuck with a complete fox package as well I am 100% ok with that . Just looking for the input you guys have given as this will be my first real shock purchase . Thanks !

That was the idea I’ve swapped emails with accutune and the kings with the dsc adjusters would be around same price as a complete fox factory co with the dsc adjusters