Search found 18 matches
- Sun Jan 07, 2018 7:07 pm
- Forum: Go-Fast Tech
- Topic: J40's & What Degree Shim Use??
- Replies: 9
- Views: 812
Re: J40's & What Degree Shim Use??
Thanks for the info! I plan on tossing in the factory wedges just to see if I get lucky but will be prepared for repositioning the spring perches to spec.
- Sat Jan 06, 2018 3:39 pm
- Forum: Go-Fast Tech
- Topic: J40's & What Degree Shim Use??
- Replies: 9
- Views: 812
Re: J40's & What Degree Shim Use??
Pad as in new spring perch? It’s looking like that is the way to go. Do it right the first time.
- Fri Jan 05, 2018 9:24 pm
- Forum: Go-Fast Tech
- Topic: J40's & What Degree Shim Use??
- Replies: 9
- Views: 812
Re: J40's & What Degree Shim Use??
Bump! Same situation here with camburg shackles. I cant find any info on the stock wedge degree nor what works shim wise with the J40's and 8.8. HELP!
Re: Free 8.8!
Gone! Thanks Chris !!!
Free 8.8!
Free 8.8 out of a Bronco. Drum to drum center section is disassembled with all spider gears and a slightly worn set of 4.88 gears along with 3.55. Moving come get it! Also have some other things laying around I need gone, rotors and hubs, steering box, factory captain grey cloth seats. Take it all. ...
- Wed Mar 29, 2017 8:04 am
- Forum: Parts
- Topic: tires wheels 92-92 hood and tube bumper
- Replies: 6
- Views: 385
Re: tires wheels 92-92 hood and tube bumper
Interested in the hood and possibly bumper 424-400-4062
- Fri Mar 24, 2017 2:10 pm
- Forum: Parts
- Topic: 5 Pro-Comp 15x10 5x5.5 Wheels w/33's
- Replies: 5
- Views: 318
- Mon Mar 20, 2017 10:17 am
- Forum: Parts
- Topic: 5 Pro-Comp 15x10 5x5.5 Wheels w/33's
- Replies: 5
- Views: 318
Re: 5 Pro-Comp 15x10 5x5.5 Wheels w/33's
Yeah that was me. bump 150 obo need the space 424-400-4062
- Thu Mar 16, 2017 5:14 pm
- Forum: Parts
- Topic: 5 Pro-Comp 15x10 5x5.5 Wheels w/33's
- Replies: 5
- Views: 318
Re: 5 Pro-Comp 15x10 5x5.5 Wheels w/33's
No plugs or slime all hold air just fine
- Thu Mar 16, 2017 5:13 pm
- Forum: Parts
- Topic: 5 Pro-Comp 15x10 5x5.5 Wheels w/33's
- Replies: 5
- Views: 318
5 Pro-Comp 15x10 5x5.5 Wheels w/33's
Hey GoFasters,
I have 5x ProComp gloss black 15x10's with 33x12.5 Kenda M/T's. Two of the tires have good tread, Id say at least 75% only bought them 6 months ago, two are worn down to 10% and one with camber wear. No curb rash, dents or cracks and have center caps. Asking 200 OBO!!!
I have 5x ProComp gloss black 15x10's with 33x12.5 Kenda M/T's. Two of the tires have good tread, Id say at least 75% only bought them 6 months ago, two are worn down to 10% and one with camber wear. No curb rash, dents or cracks and have center caps. Asking 200 OBO!!!
- Fri Feb 03, 2017 9:03 am
- Forum: General Tech
- Topic: 1989 8.8 into a 1995
- Replies: 4
- Views: 290
Re: 1989 8.8 into a 1995
Thank you for the offer! I'm in San Diego let me see if I can work something out and I'll pm you.
- Thu Feb 02, 2017 6:20 pm
- Forum: General Tech
- Topic: 1989 8.8 into a 1995
- Replies: 4
- Views: 290
1989 8.8 into a 1995
Hello Go Fast community, I have a 1995 8.8 with stock gearing in my DD. I would like to change to 4.56 gears and freshen everything up bearings, seals, trutrac, brakes and possibly a truss. I found a deal on a drum to drum rear axle from an 89 for 75 bucks. My question is will the rear end directly ...
- Tue Jan 31, 2017 5:31 am
- Forum: Go-Fast Tech
- Topic: MAF Conversion ????
- Replies: 29
- Views: 2108
Re: MAF Conversion ????
If I'm not mistaken you have an 8.8 with vss from the factory, in my 1995 with E4oD and 8.8 I needed nothing additional with the Fiveology kit accept for fabricating a bracket to adapt my k&n intake. Basically lay the new harness over the injectors, plug in the new o2 sensor connector and re pin abo...
- Fri Jan 27, 2017 9:31 pm
- Forum: Go-Fast Tech
- Topic: MAF Conversion ????
- Replies: 29
- Views: 2108
Re: MAF Conversion ????
My buddy Ryan is the owner of Fiveology,I used one of this kits on my 95 and so glad that I did. Customer service is excellent and the install is pretty straight forward. I wouldn't hesitate to use any of his products. My bronco runs and drives so much better now and the throttle response is awesome!
- Mon Nov 21, 2016 3:41 am
- Forum: Parts
- Topic: Solo C/T Lift w/ Deavers
- Replies: 6
- Views: 419
Re: Solo C/T Lift w/ Deavers
Score!
- Fri Nov 18, 2016 5:58 pm
- Forum: Parts
- Topic: Solo C/T Lift w/ Deavers
- Replies: 6
- Views: 419
Solo C/T Lift w/ Deavers
Found this on San Diego CL, thought someone here would benefit. Selling as a complete package.
http://sandiego.craigslist.org/nsd/pts/5879786133.html
http://sandiego.craigslist.org/nsd/pts/5879786133.html
- Sun Jul 10, 2016 9:20 am
- Forum: Parts
- Topic: D44 knuckles snouts spindles hubs
- Replies: 2
- Views: 183
- Thu Mar 17, 2016 8:21 am
- Forum: Free! Wardy-Style!
- Topic: WTB Stock seats
- Replies: 3
- Views: 767
Re: WTB Stock seats
I have a set of captains, grey cloth in good shape plus center console. located in San Diego.