That was my thinking, to be able to hose out the the inside, But I was shocked at the amount of heat coming off the tranny tunnel.

That was my thinking, to be able to hose out the the inside, But I was shocked at the amount of heat coming off the tranny tunnel.

My Bronco came with the wall to wall Trojan rubber. The problem with it was trapped moisture under it with rust and a funkie smell. Ripped it all out,and most of the cracked sound deadening. I thought I would epoxy paint it like a garage floor. But damn I can not believe how fricking HOT the floorbo...

tHIS with a 205 case is the dream swap. Now wait for the girls with the blue ovaries to start cry n.

Somebody did take over. I spoke to them yesterday. Google it. What I was looking for was someone who has dealt with them after the take over.

Has anybody dealt with Lee Power Steering lately, like in the last few months ? If so who over there ? are you happy. I just want to do this one time, I need to know what box to go to, and if I need a ram or not. Single swinger, on 37's, 4 and half over. After almost three days to get back to paveme...

Blew up my box today! had to walk out until I could get cell service and call for a ride. Somebody post a picture of how to mount the ram assist please. Bronco is still out there got to go back and swap box out in the dirt in order to limp it home.

How can that be? When I have The Juice Bronco in my driveway, was sort a shame when I cut it up to make a pre runner.

FYI no wedge blocks and new perches welded right on the axle tube, but my axle tube is 3.5 inch not 3. Matt I think it is small market very high price parts going out the door with no Quality Control! If you or I were selling parts to the general public we would have a striped Bronco frame in the sh...

Matt, since you ask the question about how the Solo parts fit the factory holes, I assume you already know the answer. They don't fit for shit . You are lucky if three out of four holes line up, most of the time it is more like 2 out of 4. Very sad they do all this fancy fab work frenching bolt hole...

I have more or less 4 inches to work with. This is to the bottom of the bed, not the re n forced cross piece that I will notch out for shackle clearance. The solo shackles that I already own are + or - 8 inch. So I could drop the rear 4 inch by going to a 12 inch shackle. My limit strap are already ...

Does anybody make a fabricated rear spring hanger that IS NOT A DROP DOWN ! I have a set of Solo drop downs with their shackles and Q80's but I hate the rear ride height, the ass end is just to high. To fix it I want to use the longer shackles and move the pivot point back up to close to the stock l...

Well it could be my ass end, I have a detroit locker, which acts like a spool most of the time, but I question it because I have a detroit locker in a stock chevy truck that the turning radius is not near as bad as my Bronco.

Hey I know there could be a 100 answers, but what are the most common reasons. Do you always lose turn radius with a long travel beam truck vs a stock truck? FYI about 4 inch over beams, 14 inch coil overs, travel strapped at 18 inches, on 37's

Thanks for the pics, keep them comming

I cut my stock exhaust off right after the 2nd cat months ago, I wanted to add a muffler and tail pipe to dump out the side, but it just looks like there is no room, and the most direct route would go thru the frame rail, there is no way I want to cut a hole in the frame and try to box it all in. I ...

Jim, those are good photos, if I understand right you came straight out of the Cat with no muffler ?

On a leaf spring Bronco , what is the best rout? I want to dump out in front of the passenger rear tire, but it is not clear to me how to get it there, do I go under or above the leaf spring? somebody please post up some photos.XTate

LOL Matt, #9 and #10 my HOA has fined me now 2k that's 2 fuking thousand for working in my driveway, when it was like fifty per month I would just pay it, but now there is no way, had to lawyer up I will damn sure die in that house before I pay, #3 I hate installing fiberglass, # 7 if you are doing ...

Thats a good one, my neighbors love it when my air compressor kicks on, I can't tell you how many times my wife has kicked me out of bed in the middle of the night cause I forgot to turn the power off to it. She hears it come on and starts to worry about the damn neighbors, I tell her they can Fing ...