Should be a ford recall ... The dealer changed mine for free and now mine works

I like it as it is now, don't cut it. Just back away from that sawzall, it'll be ok.

I got one from my local dealer for a touch over 23 dollars. I would check that out.

Yeah let me know if you take the job. I'll for sure head down for a little wheeling on the beach.

About the only good place to wheel around there is the Outer Banks. Tons of beaches to wheel on. The environmentalists have been cracking down a lot lately but there are still plenty of places. Its about 3 hours from Raleigh and I try to make it down there a couple times a year.

For the Advance one, add the promo code BIG50 and it takes 50 bucks off. At 219 before tax it is a pretty decent option. Thats next on the list for mine.

Good luck on the interviews. I know it's not the west coast but the Raleigh area is a really cool place. I am down there every other month for work and thoroughly enjoy it.

Well I think i just did both!!!

So as I took a pause from doing a tune up on my daily driver (97 civic hatch): I wondered "What does everyone else drive on a daily basis?" Like most my Bronco is regulated to weekend and special occasion status. So post up what vehicle you spend your time in on a daily basis. I'll start: I spend th...

Welcome to the site from the other side of VA!!

I am going to go with Phlio on this one. I am going to use the explorer brakes on my axle. The parking brake works really well if you are in an area that requires them. I have had them on two explorers I have owned and never had a single problem with the drums ever, and only ever changed the pads on...

2 - L

Thanks

For C&T beams you need to have a JIG to do it right. Solomotorsports will probably be your best bet. That is what I went with. It was $300 for the beams and I had them shipped to VA for $60.

Not sure if this helps, from what I have been told the NAPA premium are the same as the Spicer (now Raybestos). Think blue boots. I got the Raybestos Professional Grade from RockAuto.com for much less than my local NAPA. Upper 5001048 Lower 5051156 http://www.rockauto.com/catalog/x,carcode,1106064,p...

My bronco originially came with a redneck 2" dual exhaust with no cross over and cherry bombs. It sounded terrible and I immediately removed it. I went with shorty headers, bassani offroad x pipe (dual 2.5") into a 3" muffler and tailpipe. It now feels like it has way more seat of the pants power. S...

I know this is going to sound dumb and amateur, but.... anybody have any good designs or pictures of trusses for the bottom. Everything that I keep finding is designed for the top of the axle and very limited stuff for the bottom.

Looking for a set of rear springs. Not too picky something like a set of f53 or j40's. Let me know what you have and how much you are looking to get.

Its used mostly in aviation and other industries. It is used to keep tension and prevent bolts from backing out.

Here is a link I had saved about how to safety wire:

http://www.jalopyjournal.com/forum/show ... p?t=215935

Now I am with Philo. If you could get it so that you could run the larger dana 60 stuff I would be extremely interested. Also you can get the Ford Dana 60 hubs in 5x5.5" or 6x5.5" which would make this a totally feasable and strong upgrade.

Thats awesome!!! I am still on the hunt for a set for myself. I have been looking for over a year, great grab!!