Search found 1050 matches

by shockseals.com
Mon Dec 13, 2021 7:50 pm
Forum: General Tech
Topic: AC controls
Replies: 10
Views: 2849

Re: AC controls

Who has a replacement heater blend door number for the 92-96 blend door? 2 trips in a row and no matter how much jerry riggin the cable thru the glove box I couldnt get heat at all so I am assuming the door is broken somehow. cable and cam turns with the control know but no change in temp. I want to...
by shockseals.com
Sun Dec 06, 2020 12:55 pm
Forum: Go-Fast Tech
Topic: Let’s talk Motor upgrades ! Non Stroker..
Replies: 57
Views: 14891

Re: Let’s talk Motor upgrades ! Non Stroker..

I am building stroker number 2. Stroker one was Stock intake, stock MAF, 30lb/hr injectors, 255lph pump, AFR 165 Renegde 58cc heads, forged 408 stroker kit, comp cams for EFI, Roller rockers. 10:1 comp The thing ripped. Made roughly 360ft-lbs to rear wheels if I recall Motor stuck a ring at 5k mile...
by shockseals.com
Sun Dec 06, 2020 12:53 pm
Forum: Go-Fast Tech
Topic: Let’s talk Motor upgrades ! Non Stroker..
Replies: 57
Views: 14891

Re: Let’s talk Motor upgrades ! Non Stroker..

I am building stroker number 2. Stroker one was Stock intake, stock MAF, 30lb/hr injectors, 255lph pump, AFR 165 Renegde 58cc heads, forged 408 stroker kit, comp cams for EFI, Roller rockers. 10:1 comp The thing ripped. Made roughly 360ft-lbs to rear wheels if I recall Motor stuck a ring at 5k miles...
by shockseals.com
Mon Sep 21, 2020 5:35 pm
Forum: Go-Fast Tech
Topic: Desolate V562 VS Q80 Springs
Replies: 5
Views: 1506

Re: Desolate V562 VS Q80 Springs

A bronco needs between 185lb/in and 225lb/in rear spring rate and between 10.5" free arch to 12.5" pending load/set up. Hopefully the V562 is a copy of the spring set I gave Greg a couple years ago to put on a customers rig minus some ride height. Same I designed in 2010 when F53's didnt last 1 baj...
by shockseals.com
Mon Sep 21, 2020 5:21 pm
Forum: Go-Fast Tech
Topic: Desolate V562 VS Q80 Springs
Replies: 5
Views: 1506

Re: Desolate V562 VS Q80 Springs

A bronco needs between 185lb/in and 225lb/in rear spring rate and between 10.5" free arch to 12.5" pending load/set up. Hopefully the V562 is a copy of the spring set I gave Greg a couple years ago to put on a customers rig minus some ride height. Same I designed in 2010 when F53's didnt last 1 baja...
by shockseals.com
Sun Mar 29, 2020 8:37 am
Forum: General Tech
Topic: LUBE LOCKER TTD D44
Replies: 3
Views: 529

Re: LUBE LOCKER TTB D44

TTB...cant edit
by shockseals.com
Sun Mar 29, 2020 8:36 am
Forum: General Tech
Topic: LUBE LOCKER TTD D44
Replies: 3
Views: 529

LUBE LOCKER TTD D44

Is the dana 44 ttb bolt pattern the same as a typical d44 axle so a Lube Locker gasket could be used on the 3rd member? Lube Locker offers 2 types of dana 44, HD and Non HD. I am not familiar enough with either pattern to know.
by shockseals.com
Mon Mar 09, 2020 1:19 pm
Forum: General Tech
Topic: C clip eliminator d44 issues
Replies: 52
Views: 7607

Re: C clip eliminator d44 issues

While I have these sitting in front of me here's the Spicer part numbers for the bolt in parts if anyone is interested. Seal 35938. Bearing Assembly 566075. retaining ring 36121. and the seal for the other side of the diff is 40710. are these numbers for dana 44 bolt in stub axle or dana 50? They d...
by shockseals.com
Mon Feb 24, 2020 12:28 pm
Forum: Go-Fast Tech
Topic: UMP air filters
Replies: 17
Views: 7080

Re: UMP air filters

I would never run a K&N other than on a street car with a carburetor. The ump is disliked by dyno guys with maf due to how the sensor gets the air to calibrate fuel delivery. A MAF makes calcs based on laminar flow across the cross section...therefore the filter assembly its hooked to should try to ...
by shockseals.com
Sun Feb 23, 2020 5:36 pm
Forum: Go-Fast Tech
Topic: Intake Air Temp Sensor to Threaded
Replies: 5
Views: 1634

Re: Intake Air Temp Sensor to Threaded

by plug and play I mean fits in the same location, I would then pin the two additional wires into it to make it a 6pin instead of 4 pin and eliminate the other sensor.
by shockseals.com
Sun Feb 23, 2020 5:14 pm
Forum: Go-Fast Tech
Topic: Intake Air Temp Sensor to Threaded
Replies: 5
Views: 1634

Re: Intake Air Temp Sensor to Threaded

Why would you not upgrade your mass ? the newer style has the air temp sensor built in. Like a Pro M or a PMAS. I run the PMAS on my combo https://www.pmas-maf.com/?make=138&model=181&year_id=&category=57&post_type=product&action=vpf-search Id have to go back to the dyno to do that as the MAF table...
by shockseals.com
Sun Feb 23, 2020 1:39 pm
Forum: Big Broncos
Topic: Kritter's 96 Bronco
Replies: 308
Views: 40720

Re: Kritter's 96 Bronco

Whiterhino1 wrote:So kritter, on the stock manifold, did you do any porting to match the heads?
I personally did not, the engine builder maybe did. I left it all up to him.
by shockseals.com
Sun Feb 23, 2020 1:27 pm
Forum: General Tech
Topic: Lets talk seats.
Replies: 18
Views: 2808

Re: Lets talk seats.

Im considering pulling one of the seats to put in a fridge since it is usually just me and my ol lady on trips.
by shockseals.com
Sun Feb 23, 2020 1:26 pm
Forum: General Tech
Topic: Lets talk seats.
Replies: 18
Views: 2808

Re: Lets talk seats.

Haven't weighted them, but I know that rear bench is HEAVY! I've always thought it would be cool to make a tube base and have 2 bear/mastercraft/PRP/etc. buckets bolted to it & use the factory brackets/clips to make the thing come out easy. The race seats like that are waaaaay lighter than the fact...
by shockseals.com
Sun Feb 23, 2020 1:19 pm
Forum: Go-Fast Tech
Topic: UMP air filters
Replies: 17
Views: 7080

Re: UMP air filters

the UMP above with 4" in and out and 12" long flows sub 500CFM. For a stock motor thats ok, the OE flows right around 400CFM but if a performance motor is in the future, plan now. Id recommend this one if going custom... https://shop.donaldson.com/store/en-us/product/D100029/34603 80 series land cru...
by shockseals.com
Sun Feb 23, 2020 12:57 pm
Forum: Go-Fast Tech
Topic: Intake Air Temp Sensor to Threaded
Replies: 5
Views: 1634

Intake Air Temp Sensor to Threaded

Has anybody swapped to a threaded intake temp sensor from a different year ford when they made custom air cleaner set up? Im looking at these that are a fit for a 96 and forward 5.8 so I am curious if the ohms are the same and the only difference is thread vs snap in. I coudnt find sensor data for t...
by shockseals.com
Mon Dec 30, 2019 3:09 pm
Forum: Vehicles
Topic: 2015 eco boost expedition trail rig $28500
Replies: 9
Views: 4441

Re: 2015 eco boost expedition trail rig $28500

RyanDS650X wrote:Can you update the CL post so it can be shared, I know someone looking.

Sent from my SM-G960U using Tapatalk

https://sandiego.craigslist.org/ssd/cto ... 25960.html

price lowered...
by shockseals.com
Mon Dec 30, 2019 3:07 pm
Forum: Tech
Topic: 96 spindles
Replies: 16
Views: 5802

Re: 96 spindles

dont forget about 94-96 with single wheel seal you need to add to the catalog of WTF fourth variant.