I need more info on what style of truck/ bronco you are putting this on. Cut and turn or extended beams? What is your rearend set up? 17- 18 inches of travel max ? ok with you? and limited bind on the front axles this set up is very proven and works well depending on your build goal. All the guys t...

So to touch on this 14" shaft with a 12" body deal I would try to avoid it personally. Run a 14" package. The reason I say this is because after extensive conversations with fox and design guys in order to run the 14" shaft in the 12" body the remove more than half of the shaft support inside there...

From all the info I got today from what I understand is 12" will "work" HOWEVER it not the optimal size and 14s cycle the travel much better. There are some super smart people on here that explained it very well to me on the phone!!!

I'm guessing this is where my 2" is....am i on the right track thinking that fox or Bilstein would work in a 12" but not sway away??

The person I got them from says it calls for 12". Have a fab buddy looking at them now who says 12s are going to be short and will have no droop.

Correction these are 12" Coilovers. Do these buckets call for 14"??? Help!!!!

I got this from a GFB guy here and the shocks are 2.5x14, does this look like a long enough coil over?? It only hangs about 10" below the frame rail? They I figure there is no droop if I go with what I have? Or is the tab on the beam need to be tall? I'm confused!! Jason

Thank you!!! Love this place!

Correction 500 over 300. My bad

Do any of you know Nitro pressure for 2.5x12 Sway Away Coilovers? #300 over #500 springs and valved for Bronco. Brand new. Thank you!

Hey guys thank you for all the info! Looks like I need to call Autofab! Jason

I need the 87-91 lights also! What will they run on the price??

Thank you for clearing that up! Never really impressed how glass fits around the tail lights. Looks like I may had to go Autofab! Jason

Or

Like this...

I have a line on a nice set of Fiberwerx Bedsides. I noticed a lot of guys are cutting off the tail light section and mounting tabs just before the tail light. Do you just cut the tail light section off or are these made this way?

What does that cost and what would need to be done??

After seeing these pics I may have to just bring it to you!

Have you check to make sure it's not coming out of the dash and defrost at the same time? The vent control on the Broncos is vacuum, so if you have a leak or bad check valve it could come out of both thus reducing the volume out of both. I just did all the vacuum lines and actuators, I even zip tie...