Selling some New world products windsor sr. Heads
2.02/1.60 intake valves 200cc's
Roller rickers scorpion New.
Bbk fuel regulator and gauge new
Injectors 24lbs/hr Used
950$ or some coilovers or bypass 2.5's
760-623-8588
Msrp 1860 for all of these parts

You can text me at 760-623-8588

Yes is 50 state legal, im located in brawley ca.

For sale new edelbrock efi intake and spacer (used) for 351w. 550$.

I think I need to see it thru my lap top

SteveG I was unable to open the link:(

I seen the steering system for GFB's with heim joints and many without. Are they really worth it? And if so what is the common size of the ones used. My other question is in regards to the front bypass. I see many not using bypass and even read that for broncos is not very cost effective. If so why?...

Yes it will make more power. For example When your cam says that it has a lift of .500 on a roller of 1.6, you need to divide .500 By 1.6= 0.3125. That is the true lift of the cam. Now if you use a 1.7 roller, you multiply 1.7 by 0.3125 with a new lift of .531. Brrm, brrm!!

Icom, I had it for 2 years and works great. Battery lasts a good 2 days with average traffic.

i used vinyl paint, clean everything with soap and water, apply two coats of paint let it dry for 48 hours. it works really good.

I'm very curious how this turns out, I have similar heads and rockers, I'm interested to see what it's gonna take to make it run right. I can give u a pushrods length but I'm not shure if it will be the same. Also cut a 2 liter soda bottle, full it with oil and soak the pushrods submerged upright t...

thank you guys. i just need to be patient. Need Advise. my interior should be all black. im gonna repaint the bronco bright red and was thinking to paint the trim edges from doors and dashboard red to give it something to stick out from the interior Should I? http://i1302.photobucket.com/albums/ag12...

300 you are right it makes total sense what you said. I'm gonna have to buy the chronomolly pushrods....$

the intake manifold is a edelbrock 351w efi truck intake. It looks nice!! cant wait to have it installed. I installed a spacer too. but dont have pics of that one yet. http://i1302.photobucket.com/albums/ag125/piyakoracing/949556_549051905137883_1015171676_o_zpsaa881a5c.jpg http://i1302.photobucket....

so now going back to the engine. http://i1302.photobucket.com/albums/ag125/piyakoracing/948857_549036895139384_763802742_o_zps01618f37.jpg I took the top end out. the Mustang 86 Heads E6SE will be replaced with some Windsor Heads 2.02 intake valve, 1.60 exhaust, the old heads work good, the bronco f...

so now I got some free time on my hands and wanted to share my progress. once I got the bronco running from the fuel pump issue, I parked inside the garage and started to break the engine apart to upgrade the intake, heads, headers. I started on the interior as well. I'm going to work on what I alre...

http://youtu.be/Qk3aeL_ziPA
here is a video of the bronco running after being down for quite a while. the stock fuel pump was replaced for a 255gph pump

after the baja trip the engine gave up on me so I rebuild it, now is a 357 or 30 over, I installed some 86 Mustang heads, shift kit in the tranny and a dual exhaust with an X pipe. http://i1302.photobucket.com/albums/ag125/piyakoracing/968177_551794308196976_1297978775_o_zpsf4bcb78e.jpg I installed ...

my 94 Mexican national bronco was a gift from my wife in 2010, bone stock other than a flowmaster at the time. http://i1302.photobucket.com/albums/ag125/piyakoracing/Facebook/random%20pics/46118_134704159905995_8138113_n.jpg A little on this bronco's history. It was purchased by one of my wife's unc...